您要查找的是不是：
- 3D woven reinforced composite 3D机织增强复合材料
- The results show that the Young's modulus and tensile strength of the combinational 3D woven fabric reinforced composite are close to that of the 3D orthogonal woven fabric reinforced composite. 结果表明，组合式3D机织物增强复合材料具有接近正交3D机织物增强复合材料的弹性模量和抗拉强度。
- Quasistatic compressive mechanical properties of a carbon fiber woven reinforced composite: experimental study 碳纤维织物增强树脂复合材料准静态压缩力学性能实验
- DYNAMIC COMPRESSIVE MECHANICAL PROPERTIES OF A CARBON FIBER WOVEN REINFORCED COMPOSITE: EXPERIMENTAL STUDY 动态压缩下一种碳纤维织物增强复合材料的各向异性力学性能实验研究
- EXPERIMENTAL STUDY ON THE INTERLAMINAR TENSILE PROPERTIES FOR A KIND OF CARBON FIBER WOVEN REINFORCED COMPOSITE UNDER IMPACT LOADING 一种碳纤维织物增强复合材料的层间冲击拉伸力学性能实验研究
- The research results show that this kind of 3D spaced weft-knitted fabric reinforced composite bears much better properties than the traditional laminated structure and has a gr... 研制结果表明,该3D间隔纬编针织增强复合材料具有比层合材料更优的性能,其应用前景广阔。
- Resin Transfer Molding(RTM) is the fast developing process for manufacturing fiber reinforced composite recently. 树脂传递模塑工艺(Resin Transfer Molding，RTM)是近年来纤维增强树脂基复合材料制备工艺中发展较快的工艺。
- 3D woven thermoplastic composites 三维机织热塑复合材料
- This essay introduced a new fibre reinforced composite-multiaxial warp-knitted reinforced composite (MWK). 文章介绍了以经编多轴向织物为增强材料的复合材料。
- unit cell model of 3D woven structure 三维机织物单元体结构模型
- Magnesite composite materials stove body and is a magnesium oxide-based glass-fiber reinforced composite materials. 菱镁复合材料灶体这是一种以氧化镁为主的玻璃纤维增强复合材料。
- In the paper,the finite element analysis results indicate that the fiber reinforced composite splint is superior to the steel splint. 通过对纤维增强复合材料锚杆托板与钢托板的有限元分析比较,得出了纤维增强复合材料锚杆托板优于钢托板的结论。
- Discusses the 3D woven structures with changing cross-sections in widthwise direction and their weave design methods with typical 3D woven orthogonal and pseudo -orthogonal structures. 采用典型的立体机织物正交结构和准正交结构讨论了横向变截面立体机织物的结构及其组织设计方法。
- In the paper the elastoplastic constitutive relations of unidirectional fiber reinforced composite materials were modeled numerically. 本文对单向连续纤维增强复合材料的弹塑性本构关系进行了数值模拟。
- In order to solve the two difficult problems of 3D weaving in the 3D woven thermoplastic composites and of resins impregnating the 3D preform, the micro-braided yarn is developed and studied. 为了解决三维机织热塑复合材料中三维机织预型件的织造和热塑基体浸入预型件这两大难题,开发了织造预型件的微编纱。
- ILSS result of carbon fiber reinforced composite shows that the matrix is suitable for hot-melt carbon fiber winding composite material. 碳纤维增强复合材料层剪强度测试结果表明,基体适用于纤维热熔法缠绕复合材料。
- In the paper, the finite element analysis results indicate that the fiber reinforced composite splint is superior to the steel splint. 通过对纤维增强复合材料锚杆托板与钢托板的有限元分析比较，得出了纤维增强复合材料锚杆托板优于钢托板的结论。
- Compress after impact(CAI) of glass-fiber woven reinforcement epoxy laminates was investigated experimentally at room temperature and hygrothermal environment. 实验研究了二维编织环氧树脂基玻璃纤维复合材料层压板在室温和湿热条件下的冲击后压缩性能。
- Optimization CAD of the preform structure of 3D woven composites 三维机织复合材料预制件结构优选cad
- The results showed that like aramid pulp,the aramid short fibre tended to split and fibrillate when the aramid short fibre reinforced composite was mixed on a mill. 结果表明，芳纶短纤维增强复合材料在开炼机上混炼时，芳纶短纤维易劈裂和原纤化，其作用与芳纶浆粕相同，但短纤维更易于混炼。
