您要查找的是不是：
- This research aims to carry out the experiment on the zero power reactor and obtain import critical parameters. 此研究的目的是在零功率反应堆上进行临界实验,并获得重要的临界参数。
- As a result, it might open up hopeful prospects to develop high power density fusion reactor with liquid lithium surface of first wall and divertor target plate. 为发展用于高功率密度聚变堆的液态锂第一壁和偏滤器靶板展示了有希望的前景。
- The erosion of a divertor target of beryllium in a fusion reactor is discussed. 讨论了偏滤器铍靶在聚变堆工况下的腐蚀问题。
- ZPPR zero power plutonium reactor 零功率钚反应堆
- Zero power reactor response function 零功率反应堆响应函数
- Specifications for tritium breeding material onthe basis of characteristics of the pure Fusion reactor and Fusion-Fission hybridreactor are discussed. 根据聚变堆和聚变-裂变混合堆的特点讨论了对包层氚增殖材料的要求,列举了几种可作氚增殖的合理材料特性。
- A new generation fusion reactor will be needed after that to prove the next step, ignition. 此后，将需要新一代的聚变反应堆对下一阶段，即“起爆”阶段进行试验。
- This energy source can be exploited as soon as an economical fusion reactor is developed. 一旦买用的聚变反应堆被研制出来,此能源就可被开发。
- The harmonic voltage at zero power test of Longquan HVDC converter station is calculated. 摘要计算了龙泉－政平HVDC工程龙泉站系统试验期间零功率试验时的谐波电压。
- This article outlines a model for calculating the parameters oi a tokamak fusion reactor core. 本文概述了托卡马克聚变堆堆芯参数计算的一种基本模型。
- The Wiegand sensor which is a kind of zero power sensor is choosed as theimpulse sensor. 脉冲传感器选择韦根传感器,是一种零功耗磁敏传感器。
- Abstract Tritium technology for the pure Fusion reactor and Fusion-Fission hybridreactor are described in this paper. 摘要 文章描述了聚变堆和聚变-裂变混合堆的氚工艺问题。
- Problems of tritium safetyand protection for pure Fusion reactor and Fusion-Fission hybrid reactor also arediscussed. 最后对混合堆的氚安全及防护问题进行了讨论。
- A quantitative analysis for dynamic stability of a set of superconducting partial torus in a fusion reactor under a pulse current over a stationary current is given. 对于聚变反应堆中超导载流磁体在稳态电流基础上受到脉冲电流影响时的动力稳定性给出了定量分析方法。
- The new phenomenon of "tritium well depth and tritium well time" during the fusion reactor start-up phase is studied using the SWITRIM code package. 用SWITRIM数值模拟研究了聚变堆起动过程中的“氚坑深度和氚坑时间”新现象。
- Research on Zero Power Con. 电力储存用飞轮系统的零消耗控制研究。
- Abstract: A quantitative analysis for dynamic stability of a set of superconducting partial torus in a fusion reactor under a pulse current over a stationary current is given. 文摘:对于聚变反应堆中超导载流磁体在稳态电流基础上受到脉冲电流影响时的动力稳定性给出了定量分析方法。
- When the neutron decay constant is measured in the zero power assembly, the DT external neutron measurement system (scintillator photomultiplier tube detector ST-PMT) may provide trigger-signal and time correlationship. 摘要在零功率堆上进行了衰变常数测量实验中，建立外中子源DT中子测量系统可以为物理诊断系统提供触发信号和时间关联信号。
- Although the ILC's price tag may seem steep, it is roughly comparable to the costs of large science programs such as the LHC and the ITER nuclear fusion reactor. ILC的造价看似昂贵，它倒还和LHC与ITER核融合反应器等大型计画的花费约略相当。
- This curve shows that the maximum power output point is a selectable operation point, but the maximum efficiency point is a unacceptable operation point because it occurs at zero power output. 其次按照工程分析方法引入压气机和涡轮机效率，分析内部不可逆性对简单循环特性的影响。最后再分析传热不可逆性对实际回热式循环特性的影响。
