您要查找的是不是:
- work piece temperature 工件温度
- Hard grade for soft work piece to grind. 软的工件加工时用硬的结合度。
- Soft grade for hard work piece to grind. 硬的工件加工时用软的结合度。
- Fit for chamfering vertical work piece. 可用直角型工件倒角。
- Fine and dense structure for hard and brittle work piece to grind. 硬而且脆弱的工件加工时用细密的组织。
- To push the moving table and work piece simultaneously. 车缝时,推动??与裁片同步推进。
- Fit for chamfering irregular shape and arc work piece. 可用不规则形状及圆弧形状加工件使用。
- Magnesium oxide as a bonding, provide a unique chemical character with only little temperature occurred during grinding, can reduce the deformation of work piece. 以氧化镁为结合剂,因具有独特化学性质研磨时发热极少,可降低研磨时工作物变形。
- Under the condition of instant high temperature of grinding, the metal surface of work piece creates a very thin oxide, it is called grinding surface burning. 磨削表面烧伤是磨削过程的瞬时高温使工件金属表面产生一层很薄的氧化层,它会影响工件的耐磨性和使用寿命。
- Rough and open structure for soft and adhesive sticky work piece to grind. 软而且粘的工件加工时用粗松的组织。
- It can reach mirror shining, and maintain the size and precision of work piece. 可达镜面加工,并保有加工物尺寸精度。
- Finally, the roll force distribution and the rolled piece deformation in the bite stage were studied and the rolled piece temperature influence on strip-head bending was analyzed. 研究了非稳态阶段的轧制力分布特点和轧件的变形特点,分析了轧件表面温度对头部厚跃现象的影响规律。
- The automatic up-down material platform, accuratly unloads the work piece. 自动上下料台,准确上卸工件。
- Thus the problem of NDC of the work piece"s Surface-flaw has been solved. 解决了轴(孔)类工件表面缺陷无损检测的难题。
- Multi function design. Fit for chamfering small workspace or large work piece. 为多功能设计,可倒小零件及大型工件。
- Select collet of working piece, which match the size of pearl. 选择与珍珠规格相配的工件夹头。
- The bilateral-bidirectional clam has the work piece stable and the cutting face smooth without burr and dust power, and low noise and low pollution. 双边双向夹钳使工件平稳,切面平滑无毛边、无粉尘,锯切时低嘈音、低污染。
- Mainly applied in finest buffing of work piece and the manufacture of the most advanced. 主要用于工件高精度抛光、抛光膏制造等。
- Make sure that the work piece is installed into the right position before actual machining. 正式加工工件之前,应确认工件位置是否已安装正确。
- Work piece will be ground with high-speed revolution of electric or pneumatic power tool. 利用电动或气动工具之高速回转作用将工作实物研磨加工。