您要查找的是不是：
- wire flame spray gun 线材火焰喷枪
- BSP-1 flame spray gun (implement type) and thermal spray plastic powder is experimentally studied. 对BSP-1型火焰塑粉喷枪(改进型)及热喷涂用塑粉、工艺进行了研究。
- flame spray gun 火焰喷枪
- Powder flame spray and spray fusig gun, with various powder nozzles attached, can do spray coating with fine metallic powder and ceramic powder. 粉末火焰喷涂喷焊设备,配有各种粉末喷嘴,能喷涂金属微细粉末和氧化物涂层。
- Have you changed your spray gun to SATAjet RP ? 你的喷枪换成RP喷枪了吗?
- Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects,and can also be used for spary of ceramic powder. 粉末火焰喷涂喷焊设备。用惰性气体送粉，能得到更佳涂层品质，也可喷涂氧化物涂层。
- Influence of spraying distance of ceramic soft wire flame spraying on properties of layer 陶瓷软线材火焰喷涂距离对涂层性能的影响
- Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects, and can also be used for spary of ceramic powder. 粉末火焰喷涂喷焊设备。用惰性气体送粉,能得到更佳涂层品质,也可喷涂氧化物涂层。
- A Spray Gun Available for Cutting Curve Edges with Any Slot-angle. 可于任意曲线开坡口的组合喷枪装置。
- wire flame spraying 线材火焰喷涂
- SATA Spray Guns - The best guns in the world ! 德国萨塔喷枪世界上最好的喷枪！
- Reduce pressure. Use a larger nozzle. Hold spray gun closer to the surface. Spray at right angles to the surface. 改变压力。使用大一点的喷嘴。加近喷枪与底材的距离。调整高度。
- Spray gun is made up of special material, has excellent properties of anti-abrasion and anti-powder in long life use. 喷枪采用特殊材料制成,具有耐磨和不粘粉无可比拟的优点,使用寿命长。
- Hon works with acrylic spray gun, and coalesces circle and square, form and format to create his personal iconography. 韩氏擅用塑胶彩喷笔，结合方圆之形与状，自成一套意象。
- Through the process test、wearing test and microstructure observation and analysis,the convention performance of oxygen-acetylene flame spray welded layer is studied. 通过工艺试验、耐磨试验和显微组织观察分析,研究了氧-乙炔火焰喷焊层的常规性能。
- I wish to buy a resin spray gun for fiberglass layup, with chopper attachment, compressed air driven. ... 查看“机械及工业制品-焊接材料与附件-焊枪”:公司信息商品信息供应信息
- Briefly introduce oxy-acetylene flame spray's equipment,dusty spray,spray technology and application example,which provides a basis for the correct usage of the technology. 简要介绍了氧-乙炔火焰喷涂的设备、喷涂粉末、喷涂工艺以及应用实例,为正确使用该项工艺提供依据。
- Theposition of the spray gun can be adjusted laterally and longitudinally by an adjustor. 利用文丘利原理，由压缩空气通过喷枪将石英砂高速喷射到模具型腔内使污垢清除干净，灰尘由吸尘器吸除，石英砂回收重新使用。
- Thecoating is made by using an oxy-acetylene flame spraying process. 涂层采用氧-乙炔火焰喷焊工艺制成。
- Mold spray life, with some of the formulas mentioned above, should be at least several hours with some touched up with the spray gun. 用上述配方配制的脱模剂，用喷枪喷涂，其有效期至少可达几小时。
