您要查找的是不是：
- Abstract The comprehensive mechanical properties of the heat shears were analyzed and the microstructures and properties of the surfacing high wear resisting alloy layer were studied. 分析了热剪刃的综合力学性能要求，并对表面堆焊高耐磨合金层的显微组织和性能进行了研究。
- Easily wearing position of draught fan case surface,made from A 3 steel,is forced to take build-up welding process of GTC wear resisting alloy,and the service life of it is increased by a factor of 9. 采用GTC耐磨合金堆焊工艺，表面强化济钢焦化厂A3钢引风机外壳易磨损部位，使用寿命提高8倍以上。
- High-nickel heat and corrosion resistant alloy casting in heat treatment baskets, rails High-chromiumheat and wear resistant castings Alloy steel and spherical graphite cast iron. 热处理炉用耐蚀合金铸件:料盘、料筐,导架等;高铬耐热耐磨铸件:冶金、建材机械用各种耐热磨件;合金钢和球墨铸铁件。
- Determination of Ni,Cr,Mo,V,W etc.12 Element in Wear Resisting Alloy Steel by ICP AES ICP-AES法测定耐磨合金钢中Ni、Cr、Mo、V和W等十二种元素
- Development of wearing resistance alloy guiding wheel 表面复合渗镀耐磨合金导轮的研制
- Fe base wear resistant alloys strengthened by Laves phase 莱武氏相强化铁基抗磨合金
- wear resistant alloy 耐磨合金
- Wear resistant ceramics machine parts. 耐磨陶瓷用作机械零件。
- Urumqi Xinzhou Wear Resistant Material Co., Ltd. 新轴耐磨材料有限公司。
- High wear resistance and good toughness properties. 具有高的耐磨性和良好的韧性。
- Excellent strength and toughness, predominantly for large drawing dies, small heading dies and other wear resisting components. 具有优良的强度和韧性,主要用于制作大拉制模,小规格冷镦模具,还可作其他耐磨耗零部件。
- Especially the wear resistance of the alloy was excellent in a fine abrasive medium. 因此合金既有良好的耐磨性、韧性、又有好的机械加工性能。
- The wear resistance is 1.27 times of a commercial flux-cored with same alloy system and same hardness. 耐磨性为某硬度基本相同的高铬铸铁药芯焊丝耐磨性的1.;27倍。
- The wear resistance of hard alloy (YG14) and boronizing layer,boron-chromizing layer for steel 45 was studied. 研究了硬质合金(YG14)和45钢渗硼层、硼铬共渗层的耐磨性。
- The austempering in salt bath can increase the impact toughness and wear resistance of the high alloy white cast iron. 盐浴等温淬火可提高高合金白口铸铁的冲击韧性及耐磨损性能。
- The microstructure,wear resisting and abrasive mechanism of argon arc remelting area of alloyed casting iron camshaft is studied. 研究了合金铸铁凸轮轴氩弧重熔淬火后强化层的组织、耐磨性及磨损机理。
- This heat-treated alloy is the ultimate in high-strength bronzes requiring good bearing characteristics and exceptional wear resistance. 经过独特热处理的Ampco 18.;23是具有良好的承载性能与出色的耐磨性能的高强度青铜合金。
- The alloy is suitable for making wear resistant parts such as bush, axle sleeve and worm wheel etc. undor the conditions of high and middle load at the middle and low speed. 合金主要用于制作高、中载,中低速不同工况条件下工作的轴瓦、轴套、蜗轮等耐磨件。
- The effect of temper temperature on microstructures and wear resistance of surfacing deposits of ferro-based multicomponent alloy was investigated. 研究了回火温度对铁基多元合金堆焊层组织及耐磨性的影响。
- The hardness and wear resistance of Al-16% Si alloy FGM de crease gradually from inside to outside of the specimens, and change in gradient. 在外层一定厚度内，完全不含初晶硅；硬度分布为内层硬度较高，由内向外硬度逐渐减小，呈梯度分布；耐磨性由内向外呈梯度下降趋势。
