您要查找的是不是：
- Application of Repair Welding Technology for The Wear Resistant Layer of Blower Rotor 鼓风机转子耐磨层补焊技术的应用
- WC-NiP Alloy Wear Resisting Layer Sintered on the Face of Seal Ring 密封环表面烧复碳化钨-镍磷合金耐磨层的研究
- Wear resistant ceramics machine parts. 耐磨陶瓷用作机械零件。
- Urumqi Xinzhou Wear Resistant Material Co., Ltd. 新轴耐磨材料有限公司。
- CONSTRUCTION:Steel wire spiral reinforced layer, and wear resistant synthetic rubber cover. 结构：由钢丝缠绕骨架层和内外耐油、耐腐蚀合成橡胶组成。
- Recommended for important wear resistant structures. 本产品可推广应用于重要的耐磨钢结构。
- The cutting tool must be strong, tough, hard, and wear resistant. 刀具必须具有强度、硬度、韧性和耐磨性。
- Features: combine pure resin as base with glass fiber to form a resin toughened protection layer on the floor to increase the wear resistant and impact withstanding capacity. 特点：采用纯树脂为底材与玻璃纤维结合，在地板上形成树脂钢化保护层，增加地坪耐磨耐压、抗冲击能力。
- When re-install the fire resistant layer core, should guarantee the jointing surfaces are tight and without leakage. 重新安装阻火层芯子时应保证各接合面严密无泄漏。
- High wear resistance and good toughness properties. 具有高的耐磨性和良好的韧性。
- The blocked fire resistant layer core found when check should be cleaned, to guarantee each pore is unblocked, distorted and corroded fire resistant layer should be replaced. 检查发现被堵塞的阻火层芯子应清洗干净，确保芯子上每个孔眼畅通，对于变形或腐蚀的阻火层应更换。
- The wear resistance of hard alloy (YG14) and boronizing layer,boron-chromizing layer for steel 45 was studied. 研究了硬质合金(YG14)和45钢渗硼层、硼铬共渗层的耐磨性。
- Highest wear resistance for low strain of toughness. 具有最高的耐磨性、在低应力条件下具有最好的韧性。
- For high strain of toughness and good wear resistance. 在高应力条件下具有好的韧性和高的耐磨性。
- The results show that aquiclude of coal seam floor has obvious elimination to water head, and the actual water pressure exerting to the effective water resistant layer is lower than that of aquifer. 结果表明：隔水层的原始导高带对含水层水头具有较大的消减作用，作用于有效隔水层的实际水头压力远小于含水层的水头压力。
- Good characteristics for toughness and wear resistance. 具有好的耐磨损和韧性。
- The hardness, brittleness and wear resistance of Re Chrome boronized layer and boronized layer are studied. 通过对钢单渗硼层和稀土硼铬共渗层的硬度、脆性和磨损特性进行研究。
- The process using polyester FRP composite corrosion resistant layer on the steel sluice gate is simple, and it features good corrosion resistance and low cost. 聚酯玻璃钢复合防腐层的水工钢闸门防腐工艺具有使用设备少,工艺简单、腐效果好、本低等优点,适用于各种水环境中作的各种形式的水工钢闸门防腐,效果良好。
- With good wear resistant properties, it is used for making small and medium size drawing dies. 具有很好的耐磨性,主要用来制作小规格、中小规格拉制模。
- With very good wear resistant properties, it is used for making small drawing dies. 具有很好的耐磨性,主要用来制作小规格拉制模。
