您要查找的是不是:
- Fe base wear resistant alloys strengthened by Laves phase 莱武氏相强化铁基抗磨合金
- High-nickel heat and corrosion resistant alloy casting in heat treatment baskets, rails High-chromiumheat and wear resistant castings Alloy steel and spherical graphite cast iron. 热处理炉用耐蚀合金铸件:料盘、料筐,导架等;高铬耐热耐磨铸件:冶金、建材机械用各种耐热磨件;合金钢和球墨铸铁件。
- Abstract The comprehensive mechanical properties of the heat shears were analyzed and the microstructures and properties of the surfacing high wear resisting alloy layer were studied. 分析了热剪刃的综合力学性能要求,并对表面堆焊高耐磨合金层的显微组织和性能进行了研究。
- Wear resistant ceramics machine parts. 耐磨陶瓷用作机械零件。
- Urumqi Xinzhou Wear Resistant Material Co., Ltd. 新轴耐磨材料有限公司。
- Easily wearing position of draught fan case surface,made from A 3 steel,is forced to take build-up welding process of GTC wear resisting alloy,and the service life of it is increased by a factor of 9. 采用GTC耐磨合金堆焊工艺,表面强化济钢焦化厂A3钢引风机外壳易磨损部位,使用寿命提高8倍以上。
- Recommended for important wear resistant structures. 本产品可推广应用于重要的耐磨钢结构。
- The cutting tool must be strong, tough, hard, and wear resistant. 刀具必须具有强度、硬度、韧性和耐磨性。
- The corrosion resistant alloys(CRAs)for oil and gas industry is carried out to consider the stability of corrosion products. 石油天然气工业的耐蚀合金(CRAs)设计要考虑腐蚀产物的稳定性。
- High wear resistance and good toughness properties. 具有高的耐磨性和良好的韧性。
- Low hardness and poor wear resistance constrain the practical applications of titanium alloys, especially for those Made by P/M. 摘要低硬度和低耐磨性限制了钛合金尤其是粉末钛合金的实际应用。
- An integrated casting-rolling process is proposed for producing bimetal strip for friction resistant bush. Two friction resistant alloys proposed are ZnAl4-1RE and AlSi11CuRE. 介绍一种用铸轧一体化方法生产的耐磨轴瓦用双金属带材,并推荐两种耐磨合金:ZnAl4 1RE和AlSi11CuRE。
- Laser cladding on titanium alloys can improve the surface properties, obtain the coatings with high hardness, good wear resistance and low friction coefficient. 在钛合金表面进行激光熔覆,可提高钛合金的表面性能,获得高硬度、耐磨性能好、低摩擦系数的熔覆层。
- This paper discussed the influence of the magnetic field intensity H and welding current I on the hardness and the wear resistance of the Co-based alloys surfacing lager. 系统地研究了磁场强度H和焊接电流I对钴基堆焊合金堆焊层硬度和耐磨性的影响,发现当磁场强度H和焊接参数相匹配时,焊缝组织才能获得最佳的细化效果。
- Although titanium alloys exhibit excellent material properties like a high strength to weight ratio, good corrosion resistance, the poor wear resistance hampers many applications. 钛合金具有高比强、良好的耐蚀性能等优点,但其耐磨性差,限制了它在摩擦机构的应用。
- Stellite alloys are being sprayed upon metallic surfaces to enhance their wear resisting properties by various welding processes, or being, alternatively, used as casting parts. 它们可用各种焊接工艺喷涂到易损部件的表面,也可制成铸件。
- Development of wearing resistance alloy guiding wheel 表面复合渗镀耐磨合金导轮的研制
- wear resistant alloy 耐磨合金
- For many years, it has also provided parts and parcels such as venturi tube, flanges and fittings for Yantai Manoir Heat Resistant Alloys Co., Ltd. to manufacture furnaces which are then exported. 数年来,也为烟台玛努尔高温合金有限公司出口国外炉管提供了大批文丘里管、法兰、管件等炉管重要附件。
- Highest wear resistance for low strain of toughness. 具有最高的耐磨性、在低应力条件下具有最好的韧性。