您要查找的是不是：
- weakest failure modes 最弱失效模式
- Failure mode (open, closed, as is?). 故障处理模式(开启，关闭?
- The failure position and subsystem,failure mode and causes are analyzed to indicate the weak subsystem of a CNC lathe. 统计、分析了CNC车床的故障部位、故障模式及故障原因,指出了CNC车床的薄弱环节。
- The main failure mode of the automobile engine cylinder is wear. 摘要汽车发动机气缸的主要失效形式是磨损。
- Keywords: fractography, brittle material, failure mode, model rock. 关键词：裂形学、脆性材料、破裂模式、人工岩石。
- Tear down products with engineers and analysis the failure mode. 配合产品工程师对测试后的产品拆卸并进行技术分析。
- There are various failure modes, which could affect a piping system. 目前已知的影响管道系统的有不同的失效方式。
- Based on process data, it aimed at the avoidance of maintenance problems by prediction of likely failure modes. 根据过程数据,针对通过预见可能的失效模式来避免维护性问题
- Local buckling is the dominant failure mode for composite steel column. 摘要局部屈曲是组合钢柱常见的失效模式之一。
- The purpose is to analyze a system design and determine how failure modes affect the system operation. 其目的是分析系统设计,以及决定失效模式如何影响系统作业。
- What are the possible failure modes for the Dreamcast project? Should Sega launch as scheduled or postpone? 梦想演出项目最可能的失败模式是什么样的?Sega应该按计划投放市场还是推迟?
- Sensitivity formulas of system reliability of structure with two failure modes were deduced. 推导出两种失效模式下结构的系统可靠性灵敏度公式；
- In composite laminates there are four basic failure modes: matrix cracking, delamination, fiber breakage and debonding. 复合材料层合板中存在四种基本的失效模式，即：基体开裂、分层、纤维断裂及脱粘。
- The spirit is willing but the flesh is weak. 心有余而力不足。
- Fretting wear and its induced fatigue and fracture of wires was one of the major failure modes of the hoisting ropes. 摘要钢丝间的微动磨损以及由此引起的钢丝的疲劳断裂是提升钢丝绳失效的主要原因之一。
- The problem of inconsistency of basic random variables between different failure modes was resolved. 解决了不同失效模式间基本随机变量不一致的问题；
- Simulations of the Common failure modes in UPVC branch forming have been described. 通过模拟获得了三通管挤胀成型过程中的主要失效形式。
- Analysing the failure modes of each component, constructs the fault trees of both CACS and refrigeration system. 在空调系统各组成单元故障模式分析的基础上，分别建立了集中空调系统和制冷系统的故障树。
- If used as a top-down tool, FMEA may only identify major failure modes in a system. 如果把FMEA当成自上而下的工具，FMEA仅可以识别系统的主要（大型的）失效。
- Results showed that, in the course of tension, four failure modes existed meanwhile and interacted each other. 结果表明：拉伸过程中，四种破坏形式同时存在且相互作用；
