您要查找的是不是：
- real-time wave height measurement 浪高实时测量
- wave height measurement system 波高测量系统
- Minimum Detective Height and Height Measurement Accuracy Use Diffraction Wave Method to Detect a Crack Height. 衍射波法测定裂纹高度时的最小可测高度和高度测试精度。
- Portable lidar ceilometer for cloud-base height measurement[J]. 引用该论文 王青梅;张以谟;刘铁根;郑义忠.
- This height measurement is for the portrait orientation of the paper. 此为纸张纵向放置时的高度度量。
- Height gauge is widely used for height measurement,line out in machining. 高度卡尺广泛应用于机械加工中的高度测量;划线等.
- Despite an abundance of data, observations of wave height often leave much to be desired. 尽管有丰富的资料,但浪高的观测常常很不理想。
- The greater wave steepness of deep sea and slopes are, the faster wave height increases and easier wave breaks. 当波浪尖锐度及底床坡度越大，波浪浅化波高之递增率越快、且越容易碎波。
- The height vernier caliper is widely used for height measurement, scribing,etc. in machining operation. 高度游标卡尺广泛用于机械加工中的高度测量、划线等。
- The Kaohsiung harbor can resist tsunami hazard for moment magnitude scale ( w) up to 7.58 with maximum wave height of 5.5 meters. 高雄港可抵御的海啸威胁为地震矩规模7.;58左右，高雄市旗津区中段可抗衡的最大波高约5
- Is the sequence of Solder Paste height measurements defined? 锡膏厚度的测量顺序是否指定?
- The multivariate extremal theory and the establishment of joint distribution of extreme wind speed and wave height based on this theory are introduced. 介绍了多变量极值理论及在其基础上建立风速和有效波高的极值联合概率分布的方法。
- The height vernier gauges can widely used for height measurement and scribing in machining. 高度游标卡尺广泛用于机械加工中的高度测量、划线等。
- This paper studies the relations between "time-domain attenuation" and sea state or wave height, center frequency or transmitting range. 研究了浅海声信道“时域衰落”与海况、波高、中心频率和作用距离的关系。
- Aim\ To realize automatic height measurement and focusing of aerial photographic camera. 目的实现航空像机摄影高度自动测量和调焦。
- The curve describing the wave height and period varying with fetch and wind period in CHGS method is given and compared with other methods. 文章给出了CHGS方法中波高、周期随风时及风区的成长曲线,并与其他方法作了比较。
- Two wave systems travelling in different directions are superposed and the wave height distribution of the resulting system is discussed. 正>从海上的实际观测资料看来,单纯的风浪或涌和混合浪(卽风浪和涌或不同来源的海浪相叠加)的被高分布规律有显著的差别。
- The problem of fuze detonating height measurement is solved in theory and the executable method of the measurement is provided. 从理论上解决了在假设条件下引信炸高测量问题,并给出了高度测量的具体运算方法。
- The wave-making coefficient calculated by the measured wave height has 7% error when compared with that of prohaska's method. 本研究由量测的波高值计算兴波阻力系数，发现其计算值和由阻力实验由形状因子所求的的兴波阻力计算值的误差约在7%25以内。
- Is the average and range of Solder Paste height measurements SPC controlled? 锡膏厚度测量的平均值和间距SPC是否受控?
