您要查找的是不是：
- water pump cover plate 水泵盖板
- The structure is compact ,and the water pump covers small area.It accord with the need of the coalface. 该喷雾泵结构紧凑，占地面积小，符合采煤工作面的要求。
- The structure of the water pump is compact ,and the water pump covers small area.It accord with the need of the coalface. 该喷雾泵结构紧凑，占地面积小，符合采煤工作面的要求。
- Reattach cover plate to make an air and water tight seal. 重新固定盖板，并紧密密封防止空气和水通过。
- Please open the hydraulic pump cover. 把液压泵盖打开。
- water pump cover 水泵盖
- Anne took Helen to the water pump in the yard. 安妮把海伦带到院子的抽水机旁。
- Loose accessory drive belt (water pump slipping). 辅助驱动皮带松脱（水泵打滑）。
- Connect radiator lower hose to water pump. 连接散热器下部软管至水泵。
- The injection mould for a duplicator cover plate is designed. 设计了复印机盖板的注塑模具。
- Ms. Cathy: about our sample of water pump? 关于我们水泵的样品?
- Switch the water pump from A to B. 把水泵从泵切换到泵。
- Bolted cover plate to protect seal and cylinder from the ingress of debris. 上盖板可防止杂物进入缸筒损坏密封。
- TIANJIN AUTOMOBILE WATER PUMP CO., LTD. 天津汽车水泵有限公司。
- Taizhou Yuxuan Automobile Water Pump Co., Ltd. 台州玉旋汽车水泵有限公司。
- Disconnect the hose from the bottom cover plate to the relief valve. 断开底部盖板到安全阀上的软管。
- Connect radiator lower hose to water pump . 连接散热器下部软管至水泵。
- The water pump motor can start within 130 V. 水泵电机启动电压控制在130V以内。
- Slowly open all ball valves to relieve air and water pressure. Loosen bolts on groove coupler and remove groove coupler and cover plate from valve body. 慢慢开启所有球阀，释放空气和水压力。松懈沟槽状联结器上的螺栓，从阀体上拆卸沟槽状联结器和阀盖板。
- Slowly open all ball valves to relieve air and water pressure. Loosen bolts on groove coupler and remove groove couple and cover plate from valve body. 慢慢开启所有球阀,释放空气和水的压力。松开沟槽连接器上的螺栓,从阀体上拆卸沟槽连接器和盖板。
