您要查找的是不是:
- The step to analyze warpage deformation by CAE is given with air condition damper vane as example. 用有限元方法研究了温度场、压力场对注塑件残余应力及翘曲变形的影响。
- The shaped errors have many forms, including warpage deformation, Stair-stepping effect and so on in fused deposition modeling (FDM). 在熔融堆积成形制造中,形状误差有翘曲变形、台阶效应等形式。
- Under certain conditions, the calculating formula of interlayer stress and the stress-distributing diagram in cut planes are provided, and the mathematical model for warpage deformation calculation is also established. 建立了翘曲变形的数学模型,讨论了各种工艺参数(层数、扫描线长、成型室温度、层厚等)对翘曲变形量的影响。
- STUDY ON THE INTERLAMINAR STRESS AND WARPAGE DEFORMATION IN LAMINATED OBJECT MANUFACTURING 分层实体制造中层间应力和翘曲变形的研究
- warpage deformation 翘曲变形
- Surface smoothness and low warpage. 表面平滑,低翘曲性。
- Ice crystals begin to deform measurably. 冰晶就产生某种程度的变形了。
- Normally, enormous deformation is abnormal. 通常,巨大的变形是不正常的。
- Outside the strip zone, deformation is elastic. 在窄带区以外,变形是弹性的。
- The material is of practical use in case of dampness,has good mechanical properties,overcomes defects such as warpage and deformation that has Sorel cement peculiarly. 该材料适用于潮湿条件下,具有良好的力学性能;同时克服了镁质胶凝材料所特有的易翘曲、变形的缺点。
- Plastic deformation under spherical indenter. 球形压头下的塑料变形。
- It will deform into an elongated blob. 它会变形而成为一个拉长了的滴状体。
- Severe variations deform the discharge curves. 严重者使放电曲线发生畸变。
- Applied stress causes plastic deformation. 外加应力引起塑性形变。
- During deformation, the ferrite grains nuc... 碳含量提高有利于铁素体晶粒细化。
- She appeared to deformation of the face. 她出现了能变形的面孔。
- What can see more deformation is mitotic. 可以见到较多畸形的有丝分裂。
- Shoes that are too tight deform the feet. 太紧的鞋使脚变形。
- An example is given which is simulated by DEFORM. 并利用DEFORM软件给出了实例。
- The reported Warpage values may be lower than actual due to voiding. /纪录的弯曲度数值可能比实际应用的低。