您要查找的是不是：
- wall thickness error analysis 壁厚误差分析
- The Applied Condition and Calculation Error Analysis for the Wall Thickness Formula of Internal Pressure Thin-wall Tube 内压薄壁管壁厚公式适用条件及计算误差分析
- Range Min and Max.-OD with wall thickness. 范围分钟和最大Od以壁厚度。
- Error Analysis of SPI Interface and Its Resolution. SPI接口的出错分析及其改进。
- Contrastive analysis and error analysis II. 对比分析与错误分析2。
- Optimized design and check on wall thickness and distributing strengthening rib of the S-bend box were taken by static intensity analysis. 在强度静力分析基础上,对S弯盒壁厚、加强筋间距等参数进行了优化设计和校核。
- Error analysis of the measurement system is given. 给出了次测量系统的误差分析。
- MPA 8.0 features true 3D analysis capability for the accurate simulation of parts with thick, solid regions or excessive variations in wall thickness. 精神创伤和痛苦8.;0功能真正的3D分析能力，准确的模拟部分厚，固体地区或过度壁厚变化。
- The backing of bearings with greater wall thickness is not copper-plated. 轴承壁较厚的轴承,其背衬不镀铜。
- APACO processes Hardboard, MDF or Chipboard up to a wall thickness of 18mm. 橱柜/壁柜/橱柜门板/人造石厨房台面加工制作.
- German "butfering wide belt sanders (double surface sanding),the sanded block board has smoothly and even surface,and tiny thickness error. 沙光机：德国“比特飞灵“双机组沙光机（双面砂光）、砂削后的细木工板表面平整，厚度误差小。
- Error analysis of non-loading elastic extension of cable system. 悬索无荷弹性伸长的误差分析
- The forecasted wall thickness was conformed to the experimental result. 预测的壁厚和实验结果吻合得很好。
- Design,error analysis and simulation of the antenna are presented. 给出了天线各部分的设计、公差分析和仿真。
- Error analysis and correction of digital projection focimeter[J]. 引用该论文 杨并上;廖海洋;王涵.
- It is thought through actual case analysis that elastic unstability of crossing section is unlikely to occur in crossing steel pipelines when conformable with minimum wall thickness limit as per... 通过实例分析,认为穿越钢管道在满足规范要求最小壁厚限制时,通常不会发生横截面的弹性失稳,即刚度控制的实质为强度控制。
- End connection including wall thickness of connecting pipe if weld end and any special flange facings or finishes. 连接方式,如果是焊接端口和任何法兰面或表面,则包括连接管道的壁厚。
- Model Testing and Sensitivity Analysis, including error analysis, etc. 模型的测试与灵敏度分析,包括错误分析等。
- What is the foundry's checking frequency for control of core shift and wall thickness? 工厂检验芯偏移以及壁厚的频率?
