您要查找的是不是：
- view finder selector switch 寻像器选择器开关
- view finder selector 寻象器选择器
- And the excitation voltage and output were also fed through the selector switch to the digital voltmeter. 其激励电压和输出也通过选择开关接到数字电压表上。
- Turn the camera, while looking through the view finder until the second shot is framed. 一边通过取景器观察构图,一边转动相机,直到完成第二张照片的构图。
- Remember that your meter must be in position facing the open window before pressing the SELECTOR switch. 请记得在您按下切换键前;要先将仪器面向开启的窗户.
- The only difference is that you must switch the meter into UV Mode by pressing the “SELECTOR” switch. 唯一不同的是;您必须按切换键(“SELECTOR”)来转换紫外线模式.
- Remove the two (identical) screws next to the view finder and the dioptri screw too (unscrews just like a normal screw). 拆除取景器两边的螺丝和屈光度拨盘（跟取普通螺丝一样的方法）。
- Electric supply device and selector switch for the vacuum pump is located in Local Control Panel on the scraper bridge. 真空泵的配电装置及开关制安装在吸刮泥机上的现场控制盘。
- Signals containing a large amount of image data are sent from the Live MOS sensor to the optional Live View Finder at 60 fps, resulting in clear, smooth live view. 信号载有大量图像数据从发送的动态MOS传感器，可选的现场取景器为60帧，清晰，流畅的实时查看结果。
- The pneumatic control system is designed to control either of two valves by using a panel mounted selector switch to choose the valve to be controlled. 气动控制系统采用一个控制面板，安装选择开关来选择所控制的阀门，实现对两个阀门的任何一个单独控制的功能。
- The GF1 is compatible with an optional Live View Finder(DMW-LVF1), which provides the full-time live view function boasting 100% field of view regardless of the lens to attach. 该GF1系列兼容可选现场取景器（地区小型- LVF1），提供全实时取景功能吹嘘100%25视野，无论附加镜头。
- Selector switches for the by-pass butterfly valve is located on MCC2. 旁通电动蝶阀的选择制设在MCC2上。
- Selector switches for the excess sludge pump is located on MCC2, it is equipped with an emergency stop. 剩余污泥泵的选择制设在MCC2上,在水泵旁设紧急按钮。
- flight instrument selector switch 飞行仪表选择电门
- Local Run-Stop-Remote Starting Selector Switch 停机-摇控启动选择键
- Idle Run - Normal Run Selector Switch 怠速-快速运行选择键
- Measured quantity circuit selector switch 被测量线路选择器开关
- Stand-alone cable input selector switch 独立电缆输入选择选的择转换器
- The system consists of the starters, start valves, start bleed valves, pneumatic ducting, control and power circuitry, start levers and start selector switches. 系统包括起动器、起动活门、起动引起活门、增压管道、控制及电源线路，起动手柄及起动选择开关。
- electromechanical selector switch 机电选择机键
