您要查找的是不是：
- For removal of valve stem seal and lower valve spring guide. 可用于拆卸汽门油封或降低汽门弹簧。
- Replaceable hose filter and valve stem seals for field reliability. 可更换软管过滤器和阀门阀杆密封,使得现场应用可靠行更高。
- Optimal Valve Stem Seals of the Engine 发动机气门杆密封的优化
- Defective valve stem seal(s) 气门杆密封故障
- Replaceable hose filters and valve stem seals for field repair 可更换软管过滤器和阀门阀杆密封,适用于现场维修
- Standard for Qualification of Control Valve Stem Seals 控制阀门密封的质量标准
- valve stem seal 气门杆油封
- Backseat ? machined bonnet stem bushing provides back-up stem seal. 后座-经过精密加工的阀盖阀杆衬套实现后座阀杆密封。
- The connecting rod may drive a valve stem directly. 连杆可以直接带动阀门的把柄。
- Maintenance-free O-ring stem seal with additional stem scrapper. 转柄具O形密合环，不需维护。并另有转柄清洁器。
- Clean exposed portion of valve stem (Do not scratch). 清洗阀杆的外露部分(不要划伤)。
- A valve stem has broken off and effectively seized up the engine. 阀杆折断了，有效地阻止了发动机的运转。
- Two O-Rings in gland follower provide additional stem seal protection to assure tightness of less than 1 ppm. 密封压盖随动件内的两个O形环为阀杆提供更加安全的密封保护，以确保泄漏率不会超过百万分之一。
- Inspect for scuffed or bent valve stems. 检视气门杆是否擦伤或弯曲。
- If necessary, the stem and stem seal may be removed from the bonnet by removing the retainer ring and handle and screwing the stem out the under-side of the bonnet. 如果必要的话，阀杆和阀杆密封可能要从阀帽上拆卸下来，要在阀帽的下方先拆卸挡圈和手柄，以及阀座上的螺丝。
- Valve stem 412 is dimensioned to attach to diaphragm 414, best seen in FIG. 2. 从图二可见，阀杆412设计成能与隔膜414接合。
- Pack a valve stem. 扎好活门塞
- Safer and tighter stem seal. 更安全、更紧密地阀杆密封。
- A tire tool or flat stock can be used to pry one part of the bead up over the rim flange( start near the valve stem). 可用轮胎工具或扁平的撬棒把轮缘的一端从轮辋辋圈上撬起。
- In a single-stage regulator, delivery pressure increases as cylinder pressure decays, because there is less gas pressure exerted on the valve stem. 在单级调整器里，输出压力随钢瓶压力的减小而增大，这是因为施加在阀门系统上的气体压力减小了。
