您要查找的是不是：
- vacuum pressure pump 真空压力泵
- The pressure pump was developed for a fast and simple pressure calibration. 压力泵是为快速简单的压力校准开发的。
- This can be found next to the water pressure pump ( see location diagram ) . 这可以在水压泵旁边看到（见位置示意图）。
- Vacuum pressure: This window display vacuum pressure sensor gather actual pressure from entering air pipe. 本窗口中显示真空压力传感器在进气管采集到的实际的压力,它代表发动机的负荷。
- The metallography samples fabricated by the vacuum pressure impregnation resin method are introduced in detail. 详细介绍了真空浸渍树脂法制备金相样品的制备过程。
- Objective To monitor the sterilizing effect of pulsing vacuum pressure steam sterilizer. 目的:监测脉动真空压力蒸气灭菌器灭菌效果。
- Simply type the value of vacuum pressure you want in either mbar or Torr and click the button. 简单的输入真空压力值，mbar或Torr，点击确定键。
- Besides, if vacuum pressure is generated in cylinder during movement, abnormity will be caused by air eroding effect. 另外，动作中如果油缸内部产生负压，那么，将有可能由于气蚀作用而发生异常。
- The optimal vacuum pressure within Crookes radiometer is studied by way of experiments and direct simulation Monte Carlo (DSMC) method. 应用实验和蒙特卡罗(DSMC)方法,研究了Crookes辐射计工作的最佳真空条件。
- Screw the FOX Racing Shox High Pressure Pump onto the air valve until the pump shows pressure on the gauge. Do not over-tighten. 把避震专用打气筒旋紧在气阀上直到避震气筒上的压力表有气压显示，不要过份旋紧。
- Objective Discuss sterilization effect of B-class pulsation table top vacuum pressure steam sterilizer for dental handpiece. 目的探讨B级脉动真空压力蒸汽台式灭菌器对牙科手机的灭菌效果。
- The oil-free UHV outgassing technology was applied to the new X-ray tube to lower further its vacuum pressure and improve its performance. 其阳极采用“大靶”并装有热管,根本上解决散热问题,同时使用无油超高真空排气技术,提高了管内真空度从而改进其性能。
- It shows that with the increase of vacuum pressure the refractive index decreases, and with the increase of temperature the refractive index increases. 模型的研究表明，薄膜折射率随真空压强的增加而降低；
- After purging,the best heat exchanger effect and vacuum pressure could be obtained and the load of hydrogen compressor returned to normal value. 在线清洗后,凝汽器换热效果及真空度都达到最好水平,氢气压缩机恢复正常生产负荷。
- The principle of vacuum pressurizing casting technique is introduced in detail. 论述了真空增压铸造技术原理。
- Constant pressure pump is the most typic power component for hydraulic servo system.The pump's pressure characteristic affects quality of the control system directly. 恒压变量柱塞泵作为液压伺服系统的常用动力源,其压力输出特性直接影响着电液控制系统的品质。
- The stationarity of system could be improved if the system of hydraulic pressure pump station is the power source, and the system can realize the overload protection easily. 用液压泵站作为动力源可提高系统工作的平稳性，且容易实现过载保护；
- Do not pressurize mattress with high pressure pumps. 不要用高压气泵给气垫加压。
- High stability of vacuum pressure in the hearth of Czochralski(CZ) crystal growing furnace plays a very important role in the normal growth of monocrystalline silicon. 直拉单晶炉生长过程中炉膛内真空度的高稳定性对硅单晶正常生长起到很重要的作用。
- The new system tests the workpiece through the method of vacuum, that is, the test data will be sent to the computer display system through vacuum pressure sensor. 该密封检漏系统采用抽真空的方法对被测工件进行测试，通过真空压力传感器将测试数据传送至计算机测量显示系统;
