您要查找的是不是:
- The B-D experiment is the main method of examine the pulsation vacuum pressure steam sterilization machine whether safe use,but there are many influence factors in the B-D experiment process. 试验是检验脉动真空压力蒸汽灭菌器能否安全使用的主要方法,但B-D试验过程中影响因素多,其阳性检测结果并不都是因灭菌器故障而致。
- His method is called the Hydrodynamic Pressure Process. 他的方法叫做水力压力方法。
- The effect of the slice thickness,oil temperature,frying time,vacuum pressure and deoil conditions on the product quality was investigated.The best process condition was confirmed. 主要研究了切片厚度、油炸温度、油炸时间、真空度以及脱油条件对产品品质的影响,确定了最佳工艺参数。
- Vacuum pressure: This window display vacuum pressure sensor gather actual pressure from entering air pipe. 本窗口中显示真空压力传感器在进气管采集到的实际的压力,它代表发动机的负荷。
- Evolution of High Pressure Processing. 高压加工的发展。
- The metallography samples fabricated by the vacuum pressure impregnation resin method are introduced in detail. 详细介绍了真空浸渍树脂法制备金相样品的制备过程。
- Objective To monitor the sterilizing effect of pulsing vacuum pressure steam sterilizer. 目的:监测脉动真空压力蒸气灭菌器灭菌效果。
- Simply type the value of vacuum pressure you want in either mbar or Torr and click the button. 简单的输入真空压力值,mbar或Torr,点击确定键。
- Besides, if vacuum pressure is generated in cylinder during movement, abnormity will be caused by air eroding effect. 另外,动作中如果油缸内部产生负压,那么,将有可能由于气蚀作用而发生异常。
- The optimal vacuum pressure within Crookes radiometer is studied by way of experiments and direct simulation Monte Carlo (DSMC) method. 应用实验和蒙特卡罗(DSMC)方法,研究了Crookes辐射计工作的最佳真空条件。
- The Hydrodynamic Pressure Process may help reduce concerns about harmful bacteria in meat. 水力压力过程可以帮助减少肉里的有害细菌。
- Major Manufacturers of High Pressure Processing Equipment. 高压加工设备的主要生产商。
- Objective Discuss sterilization effect of B-class pulsation table top vacuum pressure steam sterilizer for dental handpiece. 目的探讨B级脉动真空压力蒸汽台式灭菌器对牙科手机的灭菌效果。
- Scientists had demonstrated that the Hydrodynamic Pressure Process could improve large pieces of meat. 科学家们证明了水力压力方法可以提高大块肉的质量。
- The principle of vacuum pressurizing casting technique is introduced in detail. 论述了真空增压铸造技术原理。
- The oil-free UHV outgassing technology was applied to the new X-ray tube to lower further its vacuum pressure and improve its performance. 其阳极采用“大靶”并装有热管,根本上解决散热问题,同时使用无油超高真空排气技术,提高了管内真空度从而改进其性能。
- It shows that with the increase of vacuum pressure the refractive index decreases, and with the increase of temperature the refractive index increases. 模型的研究表明,薄膜折射率随真空压强的增加而降低;
- Membrane material uses polyimide, the model of module uses hollow fiber, the process of practicing uses pressure process. 膜材料选用了聚酰亚胺,膜组件类型选用了中空纤维,膜过程操作方式选用了加压式。
- After purging,the best heat exchanger effect and vacuum pressure could be obtained and the load of hydrogen compressor returned to normal value. 在线清洗后,凝汽器换热效果及真空度都达到最好水平,氢气压缩机恢复正常生产负荷。
- Hot main products: hot, hit convex, concave pressure processes, set for bronzing, embossing of zincograph, magnesium version, copperplate, embossed version. 烫金主要产品:烫金、击凸、压凹等工序,订作烫金、凹凸之锌版、镁版、铜版、浮雕版。