您要查找的是不是：
- The application of CaO crucible in high temperature smelting alloy in vacuum induction furnace was introduced. 此外简单介绍了氧化钙坩埚在真空感应炉中冶炼高温合金的使用情况。
- The non-metallic inclusions morphology in the steel treated with calcium has been investigated with theoretical calculation and experiment in vacuum induction furnace. 通过理论计算和在真空感应炉中钢水钙处理试验，研究了钙处理对钢中非金属夹杂物形态的影响。
- Introduce the electroshock penetration, mechanism of vacuum induction furnace, analysis the reasons of it and put forword the methods to pvevent electroshock penetration. 摘要介绍了真空感应电炉电击穿的机理，分析了国产真空感应电炉电击穿的原因，提出了预防感应线圈匝间电击穿的各种措施。
- In situ MgO/Mg 2Si reinforced magnesium matrix composite was fabricated by adding SiO 2 into the molten magnesium under the protection of Ar gas atmosphere in vacuum induction furnace. 通过真空感应炉中氩气保护 ,在纯Mg熔体中加入SiO2 原位反应自生MgO/Mg2 Si增强镁基复合材料 ,并采用XRD、OM、ESEM、EDAX等对反应生成相的种类、形态、大小和分布等进行研究。
- Using sponge iron reduced by iron ore concentrate powder as raw material,the smelting process of pure iron is investigated through non vacuum induction furnace and vacuum induction furnace. 以由铁精矿粉直接还原出来的海绵铁为原料，以非真空感应炉和真空感应炉为冶炼设备，对纯铁的冶炼工艺进行了研究与试验。
- Via vacuum induction furnace,metallographical analysis and properties measurement,the effects of carbon content on microstructure,impact toughness and strength of RE steel for heavy rail were studied. 通过真空感应炉模拟实验,结合金相分析和性能测定,研究碳对于稀土重轨钢微观组织、冲击韧性和强度等的影响作用。
- Considering the deficiency of measurement in the melting process, an RBF neural network method is developed to predict the end-point carbon content in the vacuum induction furnace. 摘要针对冶炼过程中碳含量不能直接测定的不足，采用RBF神经网络对真空感应炉的终点碳含量进行预报。
- Via vacuum induction furnace and metallographical analysis,the effects of RE on the grain size of the austenite and distance of the pearlite laminae of high-carbon steel for heavy rail were studied. 通过真空感应炉模拟实验,结合金相分析,研究稀土对于高碳重轨钢奥氏体晶粒尺寸和珠光体片层间距等的影响作用。
- Work materials were SUS303, SUS303Cu, SUS304 and SUS316, the contents of the additives, such as S, Ca, Cu and Bi were varied and the steels were melted in furnaces of a commercial scale and a vacuum induction furnace were used. 试验材料为SUS303、SUS303Cu、SU304和SUS316。 添加元素如硫、钙、铜、铋添加在不同的钢里,用一个工业用的熔炼炉和真空感应炉炼钢。
- GA-based PID temperature control system for vacuum induction furnace 基于遗传算法的真空感应炉PID温度控制系统
- In a vacuum induction furnace 真空感应电炉
- vacuum induction furnace 真空感应电炉,真空感应炉
- To ensure smelt is successful, 5 steel study furnace of 2 vacuum induction controls carbolic element component strictly. 为保证冶金胜利,五钢探讨二所真空感觉炉严励掌控炭因素成分。
- A vacuum induction melting furnace with tri-chambers has developed to suit the high needs of the quality and production of engine vanes. 为适应我国的发动机叶片的高质量和高速度生产的要求，开发了三室真空定向结晶炉。
- The structure and function of vacuum induction CVI/CVD system is presented. 介绍了真空感应CVI/CVD系统结构、功能。
- We have 100 KGS, 300 KGS, 800 KGS induction furnace as melting equipment. 我们拥有100公斤、300公斤、800公斤电炉，可进行各种材质的熔炼炼。
- Special alloys and stainless steels are manufactured in vacuum induction melt furnaces. 特殊合金和不锈钢是在真空感应熔炼炉中制造的。
- Ti-Ni alloy was melted in CaO crucible and poured in a controlled atmosphere induction furnace. 试验中，使用氧化钙坩埚来熔炼钛镍合金，钛镍合金的浇铸过程在真空感应加热炉中完成；
- vacuum inductance furnace 真空感应炉
- Based on a medium-frequency induction furnace, design and calculation of refrigeration unit are given in details. 摘要以一台中频感应炉为例，实用的电炉用制冷计算公式。叙述了电炉用制冷冷却系统的设计计算过程。
