您要查找的是不是：
- vacuum arc remelting process 真空电弧重熔法
- Arc slag remelting (ASR) of the ESR absorption and the advantages of vacuum arc remelting. 弧渣重熔（ASR）吸收了电渣重熔和真空电弧重熔的优点。
- Vacuum arc double electrode remelting process 双电极式电弧真空重熔法
- vacuum arc remelting (VAR);electroslag refining (ESR); 真空电弧回炉(VAR)；
- Experimental Study of Melt Rate Control Model on Vacuum Arc Remelting Furnace 真空自耗电弧炉熔速控制模型的实验研究
- vacuum arc remelting 真空电弧重熔
- vacuum arc remelting furnace 真空自耗电弧炉
- vacuum arc remelting(VAR) 凝壳炉
- Argon arc remelting hardening is a new technology of manufacturing cramshaft. 氩弧重熔硬化是生产凸轮轴新工艺。
- The microstructure,wear resisting and abrasive mechanism of argon arc remelting area of alloyed casting iron camshaft is studied. 研究了合金铸铁凸轮轴氩弧重熔淬火后强化层的组织、耐磨性及磨损机理。
- The software used to simulate temperature and velocity fields in laser surface remelting process is developed on the basis of PHOENICS code. 在PHOENICS软件基础上开发了模拟激光表面重熔过程温度场和速度场的数值程序;
- The effect of second anode action on the cathode vacuum arc discharge stability in the cathode arc deposition technology is studied. 研究了阴极弧等离子体沉积中第二阳极现象改善弧放电稳定性的作用。
- By using the software, numerical calculationon heat transfer, phase change and fluid flow in laser remelting process of an aluminum alloy speciman are carried out. 对铝合金激光表面重熔过程中的传热、相变及流体流动问题进行了三维非稳态的数值模拟研究。
- Boxman, R. L., Sanders D., Martin P. J., Handbook of Vacuum Arc Science and Technology,(1995). 林建宏，磁控溅射沈积铬基硬质镀膜高温氧化与机械性质研究，中兴大学硕士论文，(1998)。
- Direct current metal filtered cathodic vacuum arc(FCVA) and acetylene gas(C_2H_2) are wielded to synthesize amorphous carbon films on Si(100). 采用直流金属磁过滤阴极真空弧(FCVA)制造出Ti和乙炔(C2H2)气体的双等离子体在单晶硅(100)上制备非晶态碳膜.
- The forces applied on the molten pool at the cathode surface under the action of an ex-ternal magnetic field during vacuum arc coating are analyzed. 分析了在外加磁场作用下，真空电弧镀膜中阴极靶面液池的受力情况，导出了液滴喷溅特性受磁场影响的关系式。
- The technological parameters determine the metal pool profile and the grain size and orientation in the electroslag remelting process, and thus affect the the quality of the final ingot. 摘要电渣熔铸中的工艺参数决定金属熔池的形状和微观晶粒的尺寸及取向，并最终影响熔铸钢锭的质量。
- For subsonic state (ion) high current vacuum arc, with the increase of electrode separations, the loss of interelectrode plasma increases. 对于离子处于亚音速状态的大电流真空电弧，随着开距的增大，极间等离子体的损失增多。
- Finally the principle is studied on how the diameter of shield influences vacuum arc voltage,shield voltage and shield current. 最后研究了屏蔽罩大小对真空灭弧室电弧电压、屏蔽罩电位及屏蔽罩电流的影响。
- Amorphous diamond(a-D) films deposited by filtered cathodic vacuum arc(FCVA) technology with different substrate bias were investigated. 采用过滤阴极真空电弧技术,通过施加不同衬底偏压制备了非晶金刚石薄膜。
