您要查找的是不是：
- Base on this, in this work we prepared in situ TiC or (TiB+TiC)/Ti-1100 composites with various volume fraction of reinforcements by the consumable vacuum arc melting. 主要研究结果如下:在所制备的原位自生(TiB+TiC)或TiC/ Ti-1100复合材料中,增强体TiB、TiC分布均匀,与基体界面洁净,没有明显反应层存在。
- vacuum arc melting 真空电弧熔炼
- vacuum arc melting process 真空电弧熔化法
- vacuum arc melting furnace 真空电弧熔炼炉
- Vacuum arc furnace is an important equipment for melting refractory alloys and active metals, which plays an important role in the preparation of special materials. 真空电弧炉是熔炼难熔合金和活性金属的重要设备,对许多工业领域的特种材料的制备起着重要的作用。
- The effect of second anode action on the cathode vacuum arc discharge stability in the cathode arc deposition technology is studied. 研究了阴极弧等离子体沉积中第二阳极现象改善弧放电稳定性的作用。
- The oxidation of Zr(Fe,Cr)_2 with different Fe/Cr ratio prepared by non-consumable arc melting is carried out in air at 773K and 973K. 用非自耗电弧炉熔炼了比值(重量比值)不同的Zr(Fe,Cr)_2,并在773K和973K的空气中氧化。
- Arc slag remelting (ASR) of the ESR absorption and the advantages of vacuum arc remelting. 弧渣重熔（ASR）吸收了电渣重熔和真空电弧重熔的优点。
- Boxman, R. L., Sanders D., Martin P. J., Handbook of Vacuum Arc Science and Technology,(1995). 林建宏，磁控溅射沈积铬基硬质镀膜高温氧化与机械性质研究，中兴大学硕士论文，(1998)。
- TiC reinforced titanium matrix composites were simply produced at low cost by non consumable arc melting technology utilizing the reaction between titanium and graphite. 利用钛与碳之间的反应 ;经非自耗电弧熔炼工艺 ;简洁、低成本地制备了 Ti C增强的钛基复合材料 .
- LIANG Shu-hua, FAN Zhi-kang, HU Rui.Microstructure and properties of CuCr series pseudobinary alloy by arc melting[J].Special Casting &Nonferrous Alloys, 2004,4(25):25-27. [4]梁淑华;范志康;胡锐.;电弧熔炼法制造CuCr触头材料的组织与性能[J]
- Direct current metal filtered cathodic vacuum arc(FCVA) and acetylene gas(C_2H_2) are wielded to synthesize amorphous carbon films on Si(100). 采用直流金属磁过滤阴极真空弧(FCVA)制造出Ti和乙炔(C2H2)气体的双等离子体在单晶硅(100)上制备非晶态碳膜.
- The forces applied on the molten pool at the cathode surface under the action of an ex-ternal magnetic field during vacuum arc coating are analyzed. 分析了在外加磁场作用下，真空电弧镀膜中阴极靶面液池的受力情况，导出了液滴喷溅特性受磁场影响的关系式。
- For subsonic state (ion) high current vacuum arc, with the increase of electrode separations, the loss of interelectrode plasma increases. 对于离子处于亚音速状态的大电流真空电弧，随着开距的增大，极间等离子体的损失增多。
- Finally the principle is studied on how the diameter of shield influences vacuum arc voltage,shield voltage and shield current. 最后研究了屏蔽罩大小对真空灭弧室电弧电压、屏蔽罩电位及屏蔽罩电流的影响。
- Amorphous diamond(a-D) films deposited by filtered cathodic vacuum arc(FCVA) technology with different substrate bias were investigated. 采用过滤阴极真空电弧技术,通过施加不同衬底偏压制备了非晶金刚石薄膜。
- TiB and TiC reinforced titanium matrix composites have been produced by non consumable arc melting technology utilizing the self propagation high temperature synthesis reactions between titanium and B 4C, graphite. 利用钛与碳化硼及石墨之间的自蔓燃高温合成反应 ,经非自耗电弧熔炼工艺制备了 Ti B晶须和 Ti C粒子混杂增强的钛基复合材料。
- According to vacuum arc theory, the contact structure of vacuum interrupter is changed to produce magnetic field in the open space of the switching house. 根据真空电弧理论,人们通过改变真空灭弧室触头结构,使其开断时在断口空间产生磁场,以此来提高真空灭弧室的短路电流开断密度。
- The descriptions of system coefficient, the factors of plasma transmission and the applications of cathodic vacuum arc deposition are analyzed emphasize. 重点分析了系统效率，等离子体传输影响因素和真空阴极电弧离子镀技术在薄膜研究和制造中的应用。
- The cathode vacuum arc ion source and ion implantation facility have been developed in our institute for industrial application of surface modification of materials. 摘要为发展金属离子束材料表面改性技术的工业应用，北师大低能核物理所研制成阴极真空弧离子源和离子注入装置。
