您要查找的是不是：
- A Design Method for Calculating the Ultimate Flexural Strength of RC Beam Strengthened with CFS 碳纤维布加固钢筋混凝土梁抗弯承载力的设计计算
- A Study of Normal Section Ultimate Flexural Strength of Prestressed Reverse-Rib-Slab with Excessive Steel Bar 预应力混凝土超筋倒肋薄板正截面承载力的探讨
- EVALUATION OF ELASTIC AND ULTIMATE FLEXURAL STRENGTH IN DESIGN OF PARTIALLY COMPOSITE BEAM 部分剪切连接组合梁弹性刚度和极限强度的计算
- A method for calculating ultimate flexural strength of preflex composite beam with the elasto-plastic effect of steel 考虑钢梁弹塑性影响时预弯组合梁极限抗弯强度的计算方法
- ultimate flexural strength 极限抗弯强度
- The results indicate that the flexural strength of the repaired beams is increased, but the ultimate load of beams with GFRP sheets debonding failure is reduced relatively. 试验结果表明，GFRP布加固的钢筋混凝土梁极限荷载显著提高，但是发生剥离破坏的试验梁极限荷载有所降低，粘结长度是影响加固梁剥离破坏的主要因素。
- The force used to break the bar is the flexural strength. 塑封料塑封后的小棒，用3点弯曲测试抗弯曲的强度。
- For flexural strength test of cement specimen and other nonmetallic material. 用作水泥或其它非金属脆性材料试块的抗折强度测定。
- The flexural strength of all FRC posts was tested with a 3-point bending test. 三点挠曲实验比较不同弯曲度的FRC弯钉与FRC直钉的挠曲强度和挠曲模量。
- At last, finite element analysis(FEA) is done by using software ANSYS,and the FEA results indicates that the CFS increases the ultimate flexural capacity of the strengthening beam. 最后利用ANSYS分析软件对加固梁进行了模拟分析，表明加固梁的抗弯极限承载力得到了提高，与试验结果一致。
- The flexural strength was determined by using the 4-point bending technique. 本研究以四点弯曲的方式量测挠曲强度。
- ultimate flexural bearing capacity 抗弯极限承载力
- The relationship between compressive strength (flexural strength) with ice temperature, stress and direction is analysed in the paper. 分析了海冰的压缩强度和弯曲强度与冰温、应力率和加载方向的关系。
- Flexural strength and elasticity decreased significantly with increasing wood content. 含木率之增加降低了抗弯强度及抗弯弹性率至为显著。
- Flexural strength, flexural modulus and impact strength of CF/BPR composites increase with increasing CF content. 随着破纤维含量的增加，CF/BPR复合材料弯曲强度、弯曲模量和冲击强度均逐渐增加；
- The material mechanical properties, such as flexural strength, are measured by three point bending techniques. 利用三点弯曲方法测定了材料的抗弯强度等力学性能。
- The modified straw powder treated with Titanate coupling agent could increase the flexural strength of PVC sheet. 经钛酸酯偶联剂处理的改性秸秆粉能增强PVC板材的弯曲强度。
- In the present paper the density of bodies beforeand after sintering as well as flexural strength were measured. 相应地对成型体的密度，弯曲强度及烧结体的密度和强度进行测量。
- With the rise of high silica glass fibers' content, the flexural strength and modulus of the composite increase. 随着高硅氧纤维含量的提高; 材料的弯曲强度及弯曲模量均明显提高.
- The flexural strength and impactstrength of non-continuous long fibres reinforced phenolics toughen... 非连续长纤维增强塑料的弯曲强度、冲击强度优于短纤维增强塑料。
