您要查找的是不是:
- ultimate bend strength 极限抗弯强度
- EQUIVALENT LOAD METHOD IN ULTIMATE BENDING STRENGTH CALCULATION OF POST-TENSIONED PRESTRESSED STRUCTURES 预应力混凝土极限抗弯承载力计算的等效荷载法
- ultimate bending strength 极限抗弯强度
- The results indicate that 3% nano-SiO_2 content can achieve the best overall properties. Tensile strength and bend strength of ESF are improved by 41% and 19%. 结果表明:纳米SiO2的添加量质量分数为3%25时,改性效果最好,其拉伸强度、弯曲强度和不加纳米粒子的ESF相比,分别提高了41%25、19%25;
- The pull strength, bend strength, strike strength, compaction strength, pulling-nail strength could satisfy the mechanical properties of the products making. 拉伸强度、弯曲强度、冲击强度、压缩强度、拔钉强度等力学性能能够满足所生产的产品性能的需要。
- The hard agglomerates that have a bad effect on the microstructure and bend strength of HDIC originates from the self-sintering property of the ultra-fine MCMB. 研磨可破坏团聚体中颗粒的粘结,减少材料的烧结缺陷,进而提高材料性能。
- And the SEM, tensile strength, impact strength, bend strength test is used to characterize the structure and properties of long fiber reinforced ABS composites. 用SEM、拉伸强度、弯曲强度、冲击强度等测试技术研究原位聚合制备的长纤维增强ABS复合材料的结构与性能。
- A quantitative characterization method for leather softness was established based on the relationship among leather softness and its bend strength and compressibility. 根据皮革柔软度与其抗弯强度和可压缩性之间的关系,建立了一种皮革柔软度的定量表征方法。
- When the content of GTC epoxy resin reaches 40%, the modified E-51 has good fluidity and processing, at the same time, the draw strength and the bend strength of the curing have different degree improve, the elongation can be increased 40%. 用GTC环氧树脂改性E-51环氧树脂,GTC含量达到4096时,具有良好的流动性和加工性,其固化物的拉伸强度、弯曲强度均有不同程度的提高,同时伸长率提高40%25。
- Stiffness It is a measure of the bending strength of paper and board. 挺度是衡量纸和纸板耐弯曲的强度性能。
- It was founded that the best bending strength was 422 MPa when aids was 18 wt%. 在助剂含量为18wt%25时,抗弯强度最大为422MPa。
- At transition region,the sea ice bending strength reached the maximum value. 海冰的弯曲强度随着应力速率的增加,经过延性、过渡和脆性三个阶段,在过渡区,海冰的弯曲强度达到最大值。
- Optimum wearresistance,high bending strength and high resistance to bonding. 耐磨性较好、较高温的抗弯强度和抗粘结能力。
- Bending strength is that quality which resists forces from causing a member to bend or deflect in the direction in which the load is applied. 弯曲强度是金属抵抗所受负载方向的弯曲和倾斜的能力(性能)。
- His strength in a crisis is an ace in the hole. 临危不惧是他的看家本领。
- The stream takes a sudden bend to the east. 小溪突然转向东流。
- The sun is the ultimate source of energy. 太阳是能量的最基本来源。
- Hard work is the ultimate source of success. 努力工作是成功之本。
- She bend over backwards to show it. 她拼命把他显露出来。
- This car is the ultimate in luxury. 这是最奢华的汽车。