您要查找的是不是:
- A circuit arrangement for deriving a phantom circuit. In four wire circuits, the two wires associated with the "GO" channel form one "side circuit", and those associated with the "return" channel form another. 用来派生一个幻象电路的电路结构。在四线电路中,与“去程”通道相关联的两线就形成了一个“半边电路”, 而与“回程”通道相关联的两线构成了另一个“半边电路”。
- In four wire circuits, the two wires associated with the"GO" channel form one"side circuit", and those associated with the"return" channel form another. 在四线电路中,与“去程”通道相关联的两线就形成了一个“半边电路”,而与“回程”通道相关联的两线构成了另一个“半边电路”。
- A circuit arrangement for deriving a phantom circuit. In four wire circuits,the two wires associated with the"GO" channel form one"side circuit",and those associated with the"return" channel form another. 用来派生一个幻象电路的电路结构。在四线电路中,与“去程”通道相关联的两线就形成了一个“半边电路”,而与“回程”通道相关联的两线构成了另一个“半边电路”。
- A circuit arrangement for deriving a phantom circuit. In four wire circuits, the two wires associated with the"GO" channel form one"side circuit", and those associated with the"return" channel form another. 用来派生一个幻象电路的电路结构。在四线电路中,与“去程”通道相关联的两线就形成了一个“半边电路”,而与“回程”通道相关联的两线构成了另一个“半边电路”。
- Don't connect up the two wires, or there will be a short circuit. 不要把这两条电线接在一起,否则会短路的。
- short two wire circuit 短距离双线电路
- two wire circuit 双线电路
- A two wire SYSTEM then requires two twisted pair, and a four wire SYSTEM requires three twisted pair. 一个二线制系统两个双绞双绞线对,一个四线制系统需要三个双绞线对。
- To be reversed any two wire can be changed motor direction. 调换任意两相接线即可改变电机旋转方向。
- Meliorating original circuit system and further improving PLC procedures. 3. 2.;改进原电路系统,进一步完善PLC程序。
- Don't connect up the two wires,or there will be a short circuit. 不要把这两条电线接在一起,否则会短路的。
- Processing two wires at th same tine as necessary. 可同时加工两条线。
- Make sure that the two wires are not touching. 务必使这两根电线相互不接触。
- Multichip module technology(MCM) is the optimal way of providing circuit system miniaturization. 多芯片组件技术(MCM)促使电路系统小型化过渡的最好形式。
- Make sure.that the two wires are not touching. 务必使这两根电线相互不接触。
- Abstract: This paper introduces the improving process of hoist oil system and circuit system. 文摘:介绍了煤矿提升绞车电路系统和油路系统的改造过程。
- Make sure? that the two wires are not touching. 务必使这两根电线相互不接触。
- Through the signal handling of affer end circuit system,the linear output and display of angular displacement can be obtained. 经后续信号电路系统的技术处理,即可获得角位移的线性输出、显示。
- When you contact these two wires, the machine will start at once. 当你使这两条导线一接触,这台机器就会立刻开始运转。
- Then a circuit system based on FPGA control chip is designed.The simulation analysis through MAX+PLUSH proves that this circuit system is workable. 以FPGA控制芯片为核心,设计了相应的电路系统,并通过MAX+PLUSH进行了仿真分析。