您要查找的是不是：
- two wire link 二线链路
- To be reversed any two wire can be changed motor direction. 调换任意两相接线即可改变电机旋转方向。
- Don't connect up the two wires, or there will be a short circuit. 不要把这两条电线接在一起，否则会短路的。
- Almost half a million kilometers of telephone and telegraph wire link the NYSE with brokerage offices around the nation and across the globe. 约50万公里长的电话和电报线把纽约股票交易所与全国以及全球各地的经纪人事务所联结起来。
- Almost half a million kilometers of telephone and telegraph wire link the NYSE with brokerage offices around the nation. 纽约证券交易所通过总长达50万公里的电话和电报线路同全国各地的经纪行保持联系。
- Processing two wires at th same tine as necessary. 可同时加工两条线。
- Make sure that the two wires are not touching. 务必使这两根电线相互不接触。
- Make sure.that the two wires are not touching. 务必使这两根电线相互不接触。
- Make sure? that the two wires are not touching. 务必使这两根电线相互不接触。
- Just as a wired link can be tapped, sniffed, etc., So can wireless. 就象可以接入、窃取有线链接一样,对无线链接也可以这样做。
- Lower the overhead console far enough to access the two wire harness connectors. 降低正顶控制台，使得能接触到两个线束的接头。
- A two wire SYSTEM then requires two twisted pair, and a four wire SYSTEM requires three twisted pair. 一个二线制系统两个双绞双绞线对，一个四线制系统需要三个双绞线对。
- When you contact these two wires, the machine will start at once. 当你使这两条导线一接触，这台机器就会立刻开始运转。
- The seat ring may be removed and replaced by pulling out the two wire retainers. 通过取出两个线圈固定器可以拆卸和更换。
- The mass difference is the main reason for the different implosion behavior of the two wire arrays. 线质量的差异是导致两者内爆行为差异的主要因素。
- No current will flow until you connect the two wires up. 把这两根电线连接起来才会有电流。
- Don't connect up the two wires,or there will be a short circuit. 不要把这两条电线接在一起，否则会短路的。
- If there are two wire screen angle consistent color separation, you must receive the moire, have to change the angle of the wire. 如果网线上有两色版网线角度不合歧，则肯不退呈现龟纹，务必保持网线角度。
- A circuit arrangement for deriving a phantom circuit. In four wire circuits, the two wires associated with the "GO" channel form one "side circuit", and those associated with the "return" channel form another. 用来派生一个幻象电路的电路结构。在四线电路中，与“去程”通道相关联的两线就形成了一个“半边电路”, 而与“回程”通道相关联的两线构成了另一个“半边电路”。
