您要查找的是不是：
- twin screw pulping extruder ( TSPE ) 双螺杆磨浆机
- twin screw pulping extruder 双螺杆磨浆机
- PPTA (polyphenylene terephthalamide) pulp was prepared by semi-continuous direct polycondensation using a co-current rotating and meshing twin screw extruder as main reactor. 摘要以同向啮合旋转的双螺杆挤出机作为主反应器，采用半连续化直接缩聚法制备了PPTA浆粕。
- PPTA(polyphenylene terephthalamide) pulp was prepared by semi-continuous direct polycondensation using a co-current rotating and meshing twin screw extruder as main reactor. 以同向啮合旋转的双螺杆挤出机作为主反应器,采用半连续化直接缩聚法制备了PPTA浆粕。
- Knowledge of General maintenance of twin screw extruder and mixers. 了解搅拌机和双螺杆挤出机的基本维修。
- A series of silane grafted polyethylenes were prepared by using the twin screw extruder. 以双螺杆挤出机为反应器，制备了一系列硅烷接枝高密度聚乙烯。
- A series silane grafted polyethylenes were prepared by using the twin screw extruder. 以双螺杆挤出机为反应器，制备了一系列硅烷接枝聚乙烯。
- With a windowed twin screw extruder the authors conduct several visualization extrusion experiments. 在可视化双螺杆挤出实验的基础上，阐述了熔融过程中物料运动的多样性问题。
- This production line adopts single or twin screw extruder as the customers actual production needs. 这条生产线采用单一或双螺杆挤出机作为客户实际生产的需要。
- The mixing facilities have experienced the following steps: Roll mixer,Banbury mixer,Single screw extruder,Twin screw extruder and Twin rotor continuous mixer. 混炼设备的发展经历了下列几个主要阶段:开炼机、密炼机、单(双)螺杆挤出机和双转子连续混炼机。
- The process of imported twin screw extruder as finishing equipment of adhesive chloroprene rubber(CR 244)was introduced. 介绍了用进口双螺杆挤出机作为粘接型氯丁橡胶(CR244)后处理装置的工艺流程,探讨了其工艺条件及成品橡胶的性能。
- Maleic anhydride(MAH) and styrene(St) melt-grafting onto polypropylene(PP) was conducted in haake torque rheometer and twin screw extruder. 在哈克流变仪和双螺杆挤出机对苯乙烯(St)/马来酸酐(MAH)/聚丙烯(PP)熔融接枝进行了研究。
- The melt grafting of itaconic acid (IA) onto low-density polyethylene (LDPE) was initiated by dicumyl peroxide (DCP) in a twin screw extruder. 以过氧化二异丙苯(DCP)为引发剂,在双螺杆挤出机中制备了衣康酸(IA)熔融接枝低密度聚乙烯(LDPE)。
- Knowledge of twin screw extruder operation, screw configuration, and how to optimize dispersion of pigments in masterbatch. 懂得如何操作双螺杆挤出机，熟悉螺杆结构，增强色母中的色粉分散性。
- The production process of UPVC special section material on the conical twin screw extruder using preplasticizing technique is introduced. 介绍了采用预塑化技术在锥形双螺杆挤出机上生产UPVC异型材的工艺过程。
- This twin screw extruder has the feature of one-side circumgyrate，it's an ideal equipment for the small-scale factory who produce powder. 该挤出机是同向高速旋转双螺杆结构，是用于多种组份物料经一定的温度在热状态下达到最佳的理想效果，适应小型企业生产粉末的理想设备。
- In this study, we proposed a novel one step method in which maleation and reactive blending occur simultaneously in a twin screw extruder. 在本研究中，我们提出了一种新颖的一步法：马来酸酐化和反应性掺混可以在一台双螺杆挤出机里同时进行。
- Introduced the driving gear box for bi-directional twin screw extruder, the new thrust device can instead of the trad... 提出了用变频控制技术改造螺杆挤出机传动系统的必要性,同时闸述了改造方法和效果。
- PP/Montmorillonite nano-meter composites with two types of microstructure were obtained via melt-intercalation on twin screw extruder. 通过控制不同的工艺条件,利用双螺杆挤出插层法制备出两种不同微观结构的聚丙烯/蒙脱土纳米复合材料。
- Three-dimensional flow simulation of mixing blocks in a conical twin screw extruder is performed with a fi nite element package, ANSYS. 利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
