您要查找的是不是:
- Tungsten cobalt alloy spray nozzle 碳化硅脱硫喷嘴碳化硅脱硫喷嘴
- tungsten cobalt alloy 钨钴合金
- Artificial hydroxyl apatite powder with high purity is applied onto the surface of the registered artificial joints made of titanium and cobalt alloy. 采用人工合成高纯度的羟基磷灰石粉末,喷涂在具有注册证的钛合金和钴铬钼合金人工关节上。
- Trim numbers with H have cobalt alloy hardfaced seat ring facing. 带有H的阀内件型号具有钴合金硬面阀座环表面。
- Copper cobalt alloy Co., LTDorCopper-cobalt alloy Co. [已解决问题] 英文“ 铜钴合金有限责任公司 ”怎么说?
- The process of alternating electrochemical maching Tungsten Cobalt in using negative semiperiod current was investigated. 主要通过负半周电流的作用说明交流电解加工钨钴硬质合金的特性。
- Cobalt Based Alloy Powder for Laser Cladding 激光熔覆用钴基合金粉末的研究
- The field performance and life are identical with traditional integral cobalt alloy pad. 现场使用性能及寿命均和传统整体钴合金垫块相同。
- The determination of boron in BMg alloy powder with acid-base titration method was established. 报道了酸碱滴定法测定硼镁合金中的硼。
- The results indicate that every performance of melting range reaches or surpasses respective performance of related cobalt alloy and Ni Cr alloy. 结果表明,熔接区的各项性能均达到和超过相关的钴合金及镍铬高温合金的各自性能。
- This paper discussed the idea of the gas atomization Mg and Mg - Al alloy powder by supersonics high ptire N2 gas. 介绍了用超音速高纯氮气流来生产气雾化镁和镁铝合金粉的设想。
- Surface thermal spray weld process with alloy powder is a new technology of surface protecting and hardening. 合金粉末表面热喷焊技术是一种新的表面防护和强化工艺。
- Titanium alloy powder was prepared by rapid solidification and mechanical milling. 采用快速凝固/机械球磨法制备钛合金粉末;
- MEDICO-SURGICAL EQUIPMENT. OSTEOSYNTHESIS EQUIPMENT FOR THE RACHIS. FORGED STAINLESS STELL OR COBALT ALLOY RACHIS PLATES. SYSTEM A. DIMENSIONS AND GEOMETRY. 外科医疗器械.;脊椎用接骨器材
- The active La in alloy powder can reduce the oxide film on Ti particles,increase the reactivity of Ti,and promote the reaction between Ti and diamond. 经X射线衍射分析发现,合金粉中的活性La能够还原Ti颗粒表面的氧化物薄膜,提高了Ti的活性,从而促进了Ti和金刚石的反应。
- The influencing factors and densification mechanism of iron-based high temperature alloy powder by pressing were investigated. 研究铁基高温合金粉末模压成形致密化过程中的影响因素和作用机理。
- All normal designs are made of high speed steel quality material no. 1.3343 and can be supplied in cobalt alloyed too. 所有的普通设计都是选用高速钢材质;钢号:1.;3343并可提供钴合金材料。
- Activated carbon powder and alloy powder is added into the thermite at the time of preparing CLSP(ceramic-lined steel composite pipe). 在制备陶瓷内衬复合钢管时,在铝热剂中加入活性碳粉、合金粉末,使原来纯铁过渡层成为钢过渡层,硬度大幅度提高,从而使钢管抗压强度明显提高。
- The influences of laser on plasma arc beam form,width and depth of molten pool in the high temperature alloy powder deposition were investigated. 研究了等离子激光复合熔积高温合金粉末过程中激光对等离子弧柱形态、熔积时熔深和熔宽等的影响。
- The alloy powder was produced by gas atomization.P/M material samples were made by pressing and sequent vacuum sintering. 通过气喷气冷法制取合金粉末,用压制后真空烧结的方法制备高铝锌基合金粉末冶金材料。