您要查找的是不是:
- Correction technique for high temperature strain gage under transient heating conditions 瞬态加热条件下高温应变计测量误差的修正方法
- transient heating conditions 过渡热状态
- Testing for temperature characteristics of high-temperature strain gauge under transient heating condition 高温应变计在瞬态加热条件下温度特性的试验研究
- High frequency vibration generation transient heating. 高频振动产生瞬间加热。
- The calculation of transient heating load is fundamental to the design of the environmental control system (ECS) for avionics pods. 摘要瞬态热载荷的分析与计算是合理设计电子设备吊舱环境控制系统的基础。
- The thermoelasticity problem for a functionally graded coating bonded to metal substrate due to transient heating on the coating surface isconsidered. 研究了金属基底/功能梯度涂层结构中的动态热应力;
- FTIR studies also showed that polyisoimide was isomerized to polyimide under heating conditions. 进一步的工作还表明:聚异酰亚胺受热转化为聚酰亚胺。
- Reliable basis was provided fur studying the loading capacity and weight lightened of aerospace materials and structure at transient heating environment. 为研究分析航空航天材料和结构在高速热冲击环境下的承载能力和结构减重提供可靠依据。
- Chiaverini, M.J. et.Al., “Pyrolisis Behavior of Hybrid Rocket Solid Fuels Under Rapid Heating Conditions,” AIAA Paper No. 97-3078, 1997. 施耿维;“混合推进剂燃烧组织与性能”;国立成功大学航空太空工程研究所硕士论文(1999).
- The oil tanker heat preservation model is established and the software is developed based on transient heat conduction gathered parameter method. 根据非稳态导热集总参数法建立油船油舱保温数学模型,研制了油船货油保温计算软件。
- Analyzes various factors influencing loss of smelting in reverberator from material states heating conditions and advance countermeasures. 从原料状态、加热条件等方面,分析了影响反射炉熔炼烧损的因素并提出了对策。
- The transient heat diffusion problems in FGMs can be solved by the MFS employing specific the transformation's formulation. 热在功能梯度材料上的扩散问题能藉由指定数学转换式转换,在使用基本解法求解。
- By adjusting the content of additives and changing heating conditions, the influential factors in leucite synthesis were explored. 采用固相反应法,通过调整添加剂的含量,制定不同的热处理制度探讨了白榴石合成中的影响因素。
- On the base of design for new fighter planes, a method for calculating and simulating transient heat load for cabins has been proposed. 以我国新一代战斗机的研制为背景,提出了高精度的飞机座舱瞬态热载荷的计算与仿真方法。
- The change of bending property for AFRP-cement mortar in different moisture and heat conditions was studied. 利用三点弯曲试验研究了不同湿热条件下外贴芳纶纤维增强塑料(AFRP)片材水泥砂浆试件抗弯性能的变化。
- Reliable basis is provided for studying the loading capacity and weight lightened of aerospace materials and structures under transient heating environment. 为研究分析航空航天材料和结构在高速热冲击环境下的承载能力和结构减重提供了可靠依据。
- The affect of heat conditions to IV of LGF/PET composite was studied, and the fracture and the mechanical properties of the composite were analyzed. 研究了热处理条件对材料的影响,对复合材料的断面形貌和力学性能进行了考察。
- It implies that the critical line is in fact a demarcation line between the transient heat output zone and input zone (re-reddening zone) in cooling process. 此临界线是冷却过程中瞬时内部热输出区与热输人区(返红区域)的分界线;
- In this paper the dynamic heat balance equation for the avionics pod and the heat transfer equation for the pod wall have been established. The transient heating load of the pod have been computed by means of finite difference equations. 本文建立了吊舱动态热平衡方程与壁面导热方程;并使用有限差分方程求解吊舱瞬态热载荷.
- With the finite|element method, the paper studies the application of the EBE parallel algorithm in computing heat conduction, and a mixed EBE parallel algorithm for transient heat conduction is given. 结合有限元法,研究了 E B E 策略在热传导问题并行计算方面的应用,给出了瞬态热传导问题的并行混合 E B E 算法。