您要查找的是不是：
- Calculation on Tooth Surface Contact Stress Course of Hypoid Gears 准双曲面齿轮齿面接触应力过程计算
- tooth surface contact stress 齿面接触应力
- tooth- surface contact stress 齿面接触应力
- Imperfections may interfere with brush to surface contact. 缺陷会影响到炭刷于表面的接触。
- Simulation test of packer rubber-casing wall contact stress. 封隔器胶筒对套管接触应力模拟试验研究。
- When the working load is large, the contact stress between cam surface and follower ends becomes the main cause of cam mechanism failure. 当工作载荷较大时,凸轮表面和从动件端部的接触疲劳破坏就成为凸轮机构失效的主要形式之一。
- This article has described the column surface 4 steps expanded calculation method adopted for the Hertz contact stress calculation of heavy machineries. 介绍在重型机械赫茨接触应力计算中,采用圆柱面4阶展开的计算方法。
- The surfaces contact at this point. 这些面在这一点交汇到一起。
- The curvature radius was derivated and the contact stress of the three-arc-sect isometric type surface was calculated through the elastic dynamics theory. 应用弹性力学理论，推导出接触点的曲率半径，对三弧段等距型面联接进行接触应力计算。
- This method is also applicable to solving contact stress and residual stress. 该方法同样适用于解决接触应力和残余应力问题。
- The sealing contact stress is an important parameter of sealing capability. 密封接触应力是影响密封性能的重要技术参数。
- Tapered bores for keyed hubs shall have a minimum of 70% transfer of bluing (surface contact) to the taper gage. 键槽轮毂的锥孔应至少有70%25的着色（表面接触）转移到锥度计上？
- In the process of synchronizing the die-cutting, die-cutting edge full length and die-cutting material surface contact. 在同步模切工艺中，模切刀刃的完整长度与模切材料的表面接触。
- A film of mucus and bacteria on a tooth surface. 齿菌斑牙齿表面一层粘液和细菌的膜
- In the mechanism analysis of consolidation of foundation soil by heavy tamping method, the dynamic contact stress calculation of hammer bottom and foundation surface is the key technical problem. 摘要在强夯法加固地基机理的分析中，夯?底部与地基表面的动接触应力计算是关键技术问题。
- Beased on the theory of Hertz stress, the contact stress of roller bearing is analysed in this paper. 摘要依据赫兹接触强度计算理论，着重研究了圆柱滚子轴承内、外圈及滚动体的接触应力。
- The blocky shape provides greater resistance to fracturing, and thus provides the maximum number of cutting points and minimum surface contact. 块状形状提供了更大的阻力压裂、从而提供尽可能多的切入点,最低表面接触。
- The Model 8009 includes conductive rubber for the top and bottom electrodes to enhance surface contact between the sample and the fixture. 8009型备有顶部和底部电极的导电橡胶，以增强样品和测试夹具之间的表面接触。
- A bony growth on the surface of a bone or tooth. 外生骨疣骨或牙齿表面上的骨质生长
- It is difficult to research the contact stress in the seal interface with fitting and using seal components. MARC，建立了橡胶O形密封圈和油封轴对称有限元模型，对其安装和使用过程中的接触变形、接触宽度上的接触应力分布等进行了分析，从而为进一步可靠设计、优化橡胶密封件提供了理论依据。
