您要查找的是不是：
- thrust bearing bush 电机推力瓦
- How many radial (axial ) clearnance are there in this bush (journal bearing, thrust bearing)? 这个轴套(轴颈轴承、止推轴承)的径向(轴向)间隙是多少?
- The bush of thrust bearing is made of elastic-metal fluoroplastics, advantageous in a strong supporting capability. 推力轴承瓦为弹性金属氟塑料瓦，具有承载能力强的特点。
- Usually, tungsten bush is used to be the thrust bearing in water power plant, but it is easy burned down since its high temperature during its operation. 水电厂的推力轴瓦，已往多采用钨金瓦，它在运行中温度偏高，容易发生烧瓦事故。
- Actual deviation of height of the spherical plain thrust bearing. 推力关节轴承实际高度偏差。
- Heavy-duty thrust bearing; locked to prevent axial movement. 坚固耐用的止推轴承;锁定后有利于阻止轴向运动。
- Suggestions on the safe operation of the bearing bush were presented. 就轴瓦的安全使用提出了建议
- The safety running of hydrogenerator needs thrust bearing sharing thrust load. 水轮发电机组的正常运转要求各推力轴承轴瓦应均匀地承受推力负荷。
- Remove thrust bearings from rear main bearing carrier. 从后主轴承托架上拆下止推轴承。
- A new structure for fixing the bearing bush of the connecting lever in a crankshaft press is introduced. 针对曲轴压力机连杆上轴瓦的固定问题，介绍了一种新的固定结构。
- The radial and thrust bearings are permanently lubricated. 径向轴承和止推轴承都是终身润滑。
- The bearing bush alloy of Al-15%Pb-4%Si-1%Sn-1.5%Cu (wt%) was prepared by mechanical alloying,subsequently cold-compacted and finally hot extruded. 采用机械合金化、冷压与热挤压法制备了Al 15%25Pb 4%25Si 1%25Sn 1 5%25Cu(质量分数 ,%25 )轴瓦合金。
- In the end, it introduces the development of the bimetallic bearing material and combination technology for bearing bush. 最后介绍了用于轴瓦的双金属轴承材料和复合工艺的发展。
- When the load is purely or predominantly axial then the choice should be a spherical plain thrust bearing (fig 9). 当负荷是纯轴向负荷或主要是轴向负荷时,应选择球面滑动推力轴承(图9)。
- The quantitative analysis and general rule analysis are applied to analyze the questions about bearing bush abrasion of No. 7 unit of Baotou No. 2 Power Plant in this thesis. 本论文以包头第二热电厂%237机组存在的%235轴瓦磨损问题分析作为论文选题，对%235轴瓦磨损的原因进行了定性和定量分析。
- This paper presents the hardness and precision of the thrust bearing runner for hydro-generator and characteristic of thrust bearing, and analyses it. 介绍了大型水轮发电机镜板硬度和精度的概况及推力轴承的特性,分析了镜板的硬度和精度的限值。
- The results showed that the segregation of Pb atoms in the interface between the alloy and the steel back was the main factor leading to the failure of the bearing bush. 结果表明 ,铅原子在合金层与钢背材料结合面上的聚集是导致轴瓦失效的主要原因。
- Each of the four legs contains a simple screw jack with a thrust bearing that is operated telescopically inside of two tubes. 四条腿中每个都装有一个简单的螺旋千斤顶，千斤顶中又有一个在两根管道中做伸缩操作的推力轴承。
- According to an analysis of the performance matching of the crankshaft body and bearing bush, Fe-C-Si-Al is selected as the powder for the explosive spray coating. 依据对曲轴基体、轴瓦与涂层摩擦副匹配性能的分析 ,选择Fe C Si Al作爆炸喷涂的粉末。
- Production and application of thrust bearing,and guide bearing made of filled PTFE in submarine motor pump are introduced. 介绍了潜水泵中止推轴承与导向轴承用填充聚四氟乙烯材料进行的生产和应用。
