您要查找的是不是:
- thermal conductive adhesive 导热胶粘剂
- Electrically conductive adhesive for static. 导电胶,可以静电消散。
- The invention relates to thermocuring isotropic conductive adhesive and a preparation method thereof. 本发明涉及一种热固化各向同性导电胶及其制备方法。
- Regarding the floor installation we advise the use of conductive adhesive types which let electrostatic charges pass, in order to insulate the floor. 关于地面的安装,我们建议使用导电(或“带传导的”)粘合剂类型的胶水,可以让电流通过,使地面绝缘。
- Thermal conductivity varies for different gases. 热传导率因不同气体而异。
- Copper conductive adhesive is prepared by using modified resins and mixed resins as cohesive materials and Copper powders as conductive fillers. 以改性树脂和混合树脂为粘料,铜粉为导电性填料,并配以适当添加剂、固化剂制备铜导电胶。
- Low thermal conductivity,low thermal capacity. 低导热率,低热容量。
- The company main products: conductive adhesive, silica gel plates, silica gel films, silicone extrusions pads, silicone, rubber, foam board, foam tubes, foam, conductive products. 公司主要产品:导电胶,硅胶板,硅胶片,硅胶垫,硅胶管,橡胶制品,发泡板,发泡管,发泡条,导电产品等。
- Density of products, and low thermal conductivity. 产品密实性好,导热系数低。
- The thermal conductivity of the wood is poor. 木头的导热性很差。
- In order to prepare Ag-coated flake graphite used as filler of conductive adhesive or poles of the battery, the electroless plating procedure was investigated that plated the silver directly in alkaline solution without activation or sensitize treatment. 摘要为制备可用于高性能电池电极和导电胶的石墨填料,采用了不经过敏化、活化处理而直接在碱性镀液中进行化学镀银的方法制备了镀银鳞片石墨。
- High thermal conductive room temperature vulcanized silicone rubber could be prepared by filling with different particle size distribution or surface treated fillers. 指出通过填充不同粒径分布的填料或对填料进行适当的表面处理,可以制备高导热室温硫化硅橡胶。
- Based on the technical requirement and building-up process condition,an epoxy resinsilver powder type conductive adhesive was prepared,which can ratisfy the electromagnetic shielding reguest. 根据电磁屏蔽产品的性能要求和成型工艺条件,研制出一种能满足电磁屏蔽要求的环氧-银粉型导电胶粘剂。
- Thermal conduct ivity, the ability of a material to t ransferheat energy along its length,w idth, o r th ickness. (热的导电率,材料沿着它的长度、宽度或厚度转移热能源的能力。
- The unstability for steam content in the sealed devices is described, it mainly results from water vapor decomposed by bonding material of conductive adhesive under high temperature. 摘要简述了集成电路陶瓷封装内部水汽含量的不稳定性,主要是由粘接材料导电胶在高温下分解释放出的水汽所造成的。
- The results are 1) thermal expansion, and 2) thermal conductivity. 结果导致:1)热膨胀,和(2)热导率。
- Study on thermal conductivity of the YAG and GGG laser crystal[J]. 引用该论文 王保松;江海河;贾先德;张庆礼;孙敦陆;殷绍唐.
- The technician plotted the thermal conductivity versus mean temperature. 技术人员勾绘出导热率对应平均温度的曲线。
- The economical and reasonable processing technology and conductive adhesive were decided by repeated selections of conductive additives,such as fillers,adhesives and surfactant. 通过对导电填料、胶粘剂、表面活性剂等助剂的反复筛选,确定了经济合理的工艺路线及导电胶液配方。
- The results show that there exists great difference between the actual results and the measured results.Heat radiation and thermal conduct have been unanalyzed theoretically. 我们从理论上分析了由于热辐射、热传导影响,得出锥形吸收腔时间温度曲线关系的数学模型;