您要查找的是不是:
- Disturbances in the recirculating flow regime can produce related variations in the heat release rate in the primary mixing region. 回流区域内的扰动可使主要混合区内热量释放发生相应的变化。
- The heat release rate (HRR) of a fire in a tunnel is a crucial factor, both in terms of fire spread and smoke production. 隧道内火灾的热释放速率对火灾蔓延和烟气生成起着关键作用。
- The CCT data revealed that the addition of NB-UFRP into EVA/NMH system not only reduced the heat release rate, but also prolonged the ignition time of the composite. 锥形量热仪实验结果表明,NB-UFRP的引入使EVA/NB-CFR三元复合材料在NMH含量相同的情况下比EVA/NMH二元复合材料有更长的点燃时间和更低的热释放速率。
- Then it analyzes the combustion characteristic of the LPG engine based on the curve of the heat release rate, and puts forward the measure of improving the performance of the LPG engine. 由生成的放热规律曲线分析了液化石油气发动机的燃烧特性,并提出了改善液化石油气发动机的性能的措施。
- Study and Application of the Heat Release Rate Computation for Dual-fuel Engine 双燃料发动机燃烧放热规律的计算与应用
- Study on the Heat Release Rate of Solid Materials Burned in Limited Space 受限空间火灾环境固体可燃物热释放速率模拟研究
- Calculation and Experiment on the Heat Release Rate for Dual Fuel Engines 双燃料发动机放热率计算和试验分析
- An Investigation on the Heat Release Rate and the Combustion Characteristics of Dual-Fuel Engines 双燃料发动机燃烧放热规律分析及燃烧特性研究
- Calculation and Analysis of the Heat Release Rate in Homogeneous Charge Compression Ignition Natural Gas Engine 均质压燃式天然气内燃机燃烧放热率的计算
- Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter 用锥形量热计测定墙面覆层材料的热释放率及其它着火试验响应特性的试验方法
- Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter 用锥形热量计测定墙面覆层材料的释热率及其它耐火试验响应特性的标准试验方法
- Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter 用小型耗氧热量计测定装饰家具和床垫部件或组件的放热率的标准试验方法
- Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter 使用小型耗氧量热计测定装饰家具和垫子的组合件或组合材料的热释放速率的试验方法
- Abstract: This paper proposes a new method to predict heat release rate from fuel injection rate in swirl chamber diesel engines. 文摘:提出了由喷油规律预测涡流室柴油机总放热规律和主、副室放热规律的一种新方法。
- The NIST 3 Megawatt Quantitative Heat Release Rate Facility, National Institute of Standards and Technology Special Publication 1007 (2003). 陈俊勋,建筑物防火安全与防火建材,交通大学机械工程学系(2005)。
- The results show that EVA/MOS has higher LOI and UL94 level, lower heat release rate, effective heat of combustion, specific mass loss rate, and better mechanical properties. 实验结果表明MOS是一种性能优良的无卤阻燃剂。 当填充量相等时,与EVA/MH相比,EVA/MOS具有更高的极限氧指数和UL94垂直燃烧级别,更低的热释放速率、有效燃烧热和质量损失速率,以及更高的力学强度。
- The parameter of double Wiebe's Functions were amended, using the amended parameter of different blended fuel.Forecast heat release rate of biodiesel and different blended fuel. 在此基础上,提出了生物柴油放热规律的双韦伯函数的修正参数,建立了不同配比混合燃料的双韦伯函数修正系数,对其他工况的生物柴油及混合燃料的放热规律进行了预测。
- The heat had blistered the paint of the building. 酷热使建筑物上的油漆起了浮泡。
- The TG-DTA showed that the thermal stability of the modified fiber was improved,the temperature range of pyrolysis was enlarged,and heat release rate was slowed down. 使用电子显微镜观察接枝粘胶纤维的表观形态,发现阻燃粘胶纤维的细度变大,纤维表面出现裂纹。
- The heat blistered the paint on the building. 高温使得那座建筑物上的油漆起了泡。