您要查找的是不是:
- The brazed joint after surfacebrazing coating or spraying can with stand elevated temperature environment. 钎料接头经表面钎涂或喷涂处理后可胜任高温工作条件。
- The effects of brazing temperature and time on the structure and property of the brazed joint between graphite and TZM alloys with Ti-based filler in vacuum were presented. 研究了钛合金真空钎焊石墨与TZM合金过程中,钎焊温度和时间对钎焊接头组织和性能的影响。
- The EDX results confirmed that the brazing process were accomplished well because elements of fillermetal foil are distributed equally and dispersedly, which could consolidate the brazed joint. 能谱分析表明,钎料中的金属元素在钎缝中均匀、弥散分布,未发现有某一元素的积聚,说明钎焊过程充分完成,而且钎缝合金化程度高,对钎缝有一定的强化作用。
- the brazed joints 钎焊接头
- Spreadability,microstructures and mechanical properties of brazed joints of silver filler metals with different content of gallium were studied. 研究了不同镓含量银钎料的铺展性能、钎缝力学性能以及钎料的显微组织变化规律。
- Brazed Joint - This type of joint has long been used wherever and whenever critical situations have been encountered in copper piping. 铜焊连接-在铜管道可能遇到紧急情况的地方和时候,就需要用到这种连接方式。
- The brazed rate is an important parameter represented product quality. 钎着率是判断钎焊质量的重要指标。
- For acquiring good properties of brazed joint of coal cutter,the effect of tempering temperature on microstructure and shearing strength of brazed joint was studied. 为提高采煤机用截齿钎焊接头的抗剪强度,研究了钎焊后回火温度对钎缝显微组织和剪切强度的影响。
- The changing rule of brazed joints strength and microstructure of silver filler metal bearing different content of gallium were studied by way of analyzing microstructures of brazed joints. 分析了不同含镓量银钎料及其钎缝的显微组织,结合钎料成分及能谱分析结果,研究了钎料、钎缝的显微组织与其力学性能的关系。
- Based on the results of the stress redistribution, factors affecting the strength of stainless steel brazed joints at high temperature are discussed. Optimized joint types for design are recommended. 以接头蠕变应力再分布为依掘,参数化分析了不锈钢钎焊接头的高温强度的影响因素,并给出了接头设计的优选形式。
- The Panama Canal joints two oceans. 巴拿马运河连接两大洋。
- 8. The EDX results confirmed that the brazing process were accomplished well because elements of fillermetal foil are distributed equally and dispersedly, which could consolidate the brazed joint. 能谱分析表明,钎料中的金属元素在钎缝中均匀、弥散分布,未发现有某一元素的积聚,说明钎焊过程充分完成,而且钎缝合金化程度高,对钎缝有一定的强化作用。收藏指正
- A new cup-type grinding wheel of the brazed monolayer diamond is developed with a defined grain pattern on the wheel surface. 摘要通过优化排布金刚石磨料研制出钎焊单层金刚石端面砂轮。
- The two joints hang together pretty well. 这两个接头衔接得很好。
- The characteristics of the braze materials with different states were compared overall. 对钎焊的特点及钎焊料应具备的性能进行了较为全面的论述。
- The wind whirled the dead leaves about. 风吹得枯叶在四处回旋。
- The wind was whispering in the trees. 一阵风穿过树林沙沙作响。
- The temperature of the joint should be hot enough to melt the brazing alloy. 连接部位的温度应该高到能够融化铜焊合金。
- There are 26 letters in the English alphabet. 英语字母表中有26个字母。
- Foreign nationals were asked to leave the country. 外国侨民被要求离开该国。