您要查找的是不是：
- The development tendency of the injection molding software is concluded. 总结了注塑成型研究和注射模软件的发展趋势。
- Maintain the injection molding equipment with mechanical/electrical functions. 运用机械和电气知识来维护注射成型设备。
- At the polyalkene Oct.1999, after the injection molding, hot press as molding. 一般以聚烯烃为主要原材料，经过注塑、热压等工艺加工成型。
- This paper introduced the injection mold design of the Polyurethane elastomer. 介绍聚氨酯弹性体的注塑模具的设计。
- The concrete application of CAE technology in the injection molding is illustrated by the engineering cases. 用工程案例说明注射成型中计算机辅助工程(CAE)技术的具体应用。
- Properties of recycled acrylonitrile-butadiene-styrene(ABS) resin in the injection molding were studied. 研究了在塑料注射制品生产过程中一次回收料的使用问题。
- The research is to apply FBGs to the injection molding by imbedding it right into the injection process. 本实验将光纤光栅于塑胶射出成型的浇注制程时，直接将光纤光栅埋到产品中。
- Bachelor or above degree in mechanical/material engineering with min.3 years experience in the injection molding field. 大学本科或以上学历，机械/材料工程专业，3年以上在注射成型模具领域的工作经验。
- Have the good knowledge of the injection molding parameter optimizing; At least 4 year's working experiences on molding process. 具备良好的注塑工艺优化的技能,至少4年以上注塑工艺工作经验。
- Analyzed the structure characteristics and molding technology of the mini-coil skeleton, introduced the injection mold structure. 分析了小型线圈骨架的结构特点及成型工艺,介绍了小型线圈骨架注射模结构。
- Analyzed the technology characteristics of the barrette, introduced the injection mold structure and work principle. 分析了发夹的工艺特性,介绍了发夹注射模的结构设计和工作原理。
- This paper presents the injection parts molding process and injection mold structural characteristics and operating process of refrigerator water box. 介绍了冰箱接水盒注塑件的成型工艺特点及注塑模具的结构特点及工作过程。
- The auspices of the new mold tryout and to amend and improve the injection molding process to address the quality of the actual mold. 主持新模具的试模及修正和完善注塑工艺，解决模具实际的质量问题。
- The mold flow analysis utilizes the computer to simulate dynamic filling process about the injection mold. 模流分析技术是利用计算机对注塑件动态填充过程进行模拟。
- The injection molding technique, after-treating technique and ultrasonic welding technique of PPS products are described in detail. 重点阐述了PPS制品的注塑工艺、后处理工艺以及超声波焊接工艺。
- The injection molding technology of the load reflector made of PC. The quality problem often appeared and their solving methods are introduced. 介绍聚磷酸酯公路路标反光镜片的注射成型工艺、常出现的质量问题及解决办法。
- The rubber modifying UP resin is used to improve the toughness of the injection molding products in terms of the low mechanical properties especially the bad impact resistance. 针对注射制品力学强度较低(与模压件相比)，尤其是抗冲击能力差的特点，本文通过引入橡胶改性UP树脂体系，达到了对注射制品增韧的效果。
- Through genetic algorithm, the injection molding parameters that affect thin-wall mould warpage,namely the mold temperature, melt temperature, filling pressure, packing pres... 按该参数进行试验,效果良好,可以有效地减小薄壳塑件翘曲变形,其试验数值与计算数值基本相符,说明所提出的方法是可行的。
- The injection mold with double parting surfaces was usually used in the multi-cavity structure and pin sprue injection system. 双分型面注射模,常用于一模多腔、点浇口形式浇注系统的注射模。
- The paper introduces the injection molding equipment, mold and molding technique for the thermotolerant engineering thermoplastic polyphenylene ether sulphone. 介绍耐高温热塑性工程塑料聚苯醚砜树脂的注射成型设备、模具和注射工艺等。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
