您要查找的是不是:
- tension test piece 拉伸试件
- Lowering test and tension test of anchor. 锚投掷试验和拉力试验。
- Mm. B: bond surface of test piece: 50mm in width. 试件粘合面宽度50。
- The work hardening rate of pure tantalum was studied by tension test, optical microscope and TEM. 摘要借助力学性能实验、金相显微镜和透射电镜等手段研究了纯钽的加工硬化速率。
- Metallographic analysis,tension test,fatigue test and SEM analysis were conducted on the TA15 titanium alloy welded joint. 对TA15钛合金板材电子束焊接试样进行了金相分析和静力试验、疲劳试验和扫描电镜(SEM)分析。
- The secondary factors are the number of holes and perforating rebar, the size of each test piece and so on. 其次是每个试件的孔洞个数和贯通钢筋个数以及试件尺寸等。
- Bend the test piece 180 degrees over a mandrel with its longitudinal axis normal to the axis of mandrel. 将测试件在一根芯轴上弯曲180度,使其纵向轴线垂直于芯轴的轴线.
- The steel plate’ performance in the lamellar tearing resistance aspect can be assessed by reduction in area when doing tension test of through-thickness. 钢板的抗层状撕裂性能采用厚度方向拉力试验的断面收缩率来评定。
- Based on the direct tension test, the characteristics of tension stress-strain full curves of steel fiber reinforced self-stressing concrete were investigated. 摘要通过直接拉伸试验研究了不同自应力等级下的钢纤维自应力混凝土的受拉应力-应变全曲线特征。
- If an overall pattern (sometimes circular lines) appears on the test surfaces, how should the inspector reprocess the test piece? 如果零件上出现遍及表面的显示(有时是环形线),检验员应如何重新处理零件?
- At present, the conventional rock body mechanical test comprises a unidirectional compression test, a unidirectional tension test, a triaxial compression test and a shear test. 目前常规的岩体力学试验主要有单向压缩试验,单向拉伸实验,三向压缩试验,和剪切试验等。
- The formularies and can be received and used to describe the influence of the placed time of sawed test piece to the plywood formaldehyde emission. 凯尔文模型较好地模拟了胶合板甲醛粘弹性释放特征;
- Fees for Chromatic Harmonica Solo (Open Section) and Tremolo Harmonica Solo (Open Section) include the cost of one copy of the test piece. 半音階口琴獨奏公開組及複音口琴獨奏公開組之報名費已包括指定樂曲樂譜一份之費用。
- The scientists tested pieces of Beethoven's hair. 科学家检测了贝多芬的几根头发。
- It was incorporated into PVC with barium stearate,and the heat stability and mechanical property were comprehensively studied by Congo red method,Tension test and izod impact strength test. 并将它与硬脂酸钡复配添加到聚氯乙稀(PVC)中,通过刚果红试纸法、拉伸试验及冲击试验等多种方法对其PVC复配系统的热稳定性能及力学性能进行了综合研究,并确定了复配的最佳用量。
- The tensile character of undisturbed loess is analysed by monaxial tension tests. 通过单轴拉伸试验,研究原状黄土的拉伸特性。
- The mica test pieces were prepared by cleavage so as to be atomically smooth. 云母试样是用劈裂的方法制备的,因此可以达到原子级的平滑程度。
- This paper introduces a design of machine in small range tension test which is applied to a field of micro-electronics integrate circuit, by analyzing tasting method and sensor theory. 通过对张力测试的分析及传感器的原理分析,介绍一种应用于测试微电子集成电路丝线张力的小量程张力测试机构的设计。
- A method of fuzzy control based on alterable domain for hydromatic tension test machine are introduced. A idea of design and practicability for fuzzy control system are also given. 介绍液动拉力试验装置一种基于可变论域范围的模糊控制方法,给出实用模糊控制系统的完整设计思想,说明其实用性和有效性。
- The definitions of term relating to tension testing appearing in ASTM and China standard were explained and compared in this paper. 就美国ASTM标准与我国金属拉伸试验标准中的力学性能名称和定义进行了对照和解释。