您要查找的是不是：
- The structure, control principle and main part design features are introduced for precision rolling machine of the tapered bearing ring. 介绍了圆锥轴承套圈精密辗扩机的结构、控制原理及各主要组成部分的设计特点。
- tapered bearing ring 圆锥轴承套圈
- Allowance angle error for tapered bore bearing rings 圆锥孔轴承的角度允差
- Tapered bearing seatings are checked using ring gauges, special taper gauges or sine bars. 圆锥形轴承基座则采用环规、专用锥度规或正弦规检查。
- Taper bore of tailstock barrel No. 尾座套筒锥孔锥度。
- Inner raceway grinding is more difficult in bearing ring production. 轴承内圆磨削加工是轴承套圈磨削加工比较困难的工序。
- Precision Rolling of Tapered Roller Bearing Ring 圆锥滚子轴承套圈精密辗扩
- Bearing with tapered bore, taper 1:12, intermediate ring between the outer rings and pressed steel cages (fig 14). 带有锥度为1:12的圆锥孔、外圈之间的中隔圈和钢板冲压保持架的轴承(图14)。
- Bearing with two single row inner rings and one double row inner ring with tapered bore (taper 1:12 or 1:30) with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带锥形孔(锥度1:12或1:30)、滚子和保持架组件。
- Bearings with a tapered bore are always mounted with an interference fit. 带圆锥孔轴承始终以过盈配合安装。
- However, some bearings with a tapered bore 1:12 can be supplied (fig 18). 但是,一些轴承可提供锥度为1:12的圆锥孔设计(图18)。
- A few relatively wide bearings have inner rings with a tapered bore of 1:30. 少数相对较宽的轴承带锥度为1:30的内圈。
- The fit of a bearing ring on its seating must not lead to uneven distortion of the ring (out-of-round). 轴承圈在其支承面上的配合不得导致轴承圈的不均匀变形(不圆度)。
- When grinding the bearing ring, the outside diameter of it was taken as locating datum to process the outer raceway with the assistance of electromagnetic centerless clamper. 在分析磨削加工精度影响因素的基础上,主要讨论了齿轮磨床的刚度特征,从静态刚度入手,对动态稳定性问题进行了深入研究。
- In terms of both theory and practice,external centerless grinding of bearing ring was analyzed in greater detail,which has obvious guiding significance to production. 从理论和实践上对轴承套圈外圆无心磨削进行了比较详细的分析,对生产有一定的指导意义。
- For bearings having a tapered bore, inner rings are always mounted with an interference fit. 对于圆锥孔轴承,内圈的安装始终采用过盈配合。
- Y-bearing with zinc coated bearing rings and special non-toxic grease. Y-轴承,带镀锌轴承圈和特种无毒性油脂。
- Countershaft assembly uses tapered bearings to reduce end play and extend gear life. 中间轴组合使用锥形滚柱轴承以减少轴向间隙并延长齿轮使用寿命。
- Y-bearing with zinc coated bearing rings and zinc coated locking collar. Y-轴承,带镀锌轴承圈和镀锌锁定环。
- The bearings are generally mounted with an interference fit on the roll necks and therefore often have a tapered bore. 轴承一般以过盈配合安装在轧辊轴颈上,因此经常带锥形孔。
