您要查找的是不是:
- Side view of square head bolt with adjustable thread length. 螺纹长度可调整的方头螺栓侧面图。
- Side view of hexagonal head bolt with adjustable thread length. 螺纹长度可调整的六角头螺栓的侧面图。
- Grip the sleeve and the piston assembly by the head of the hex head bolt. 用六角头螺栓的头部夹住套筒和活塞总成。
- The deconvolution between cylinder pressure signal and head bolt vibration signal was analyzed. 摘要研究了发动机气缸压力信号与表面振动响应信号之间的反卷积关系;
- Kit includes: Body, Disc, Piston Diaphragm Assembly, Hex Head Bolt, Disc Retainer, Sleeve, Bottom Bolt, Shutoff Plate, and Bottom Flange. 组件包括:阀体,阀瓣,活塞隔膜总成,六角头螺栓,阀瓣固定器,套筒,底部螺栓,关闭板,和底部法兰。
- Dietitians often note that clients who don’t overly restrict themselves during the week, don’t head into the weekend feeling deprived and can better handle temptation. 饮食专家发现,通常那些在平时不过分约束自己饮食的人就不会感觉受到了剥夺而去期待周末大吃一顿。所以这些人能更好地抵制周末美食的诱惑。
- All field splices were bolted using ASTM A325 hex head bolts. 所有现场拼接都用美国材料试验协会的A325六角形头螺栓。
- Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt. 冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。
- Abstract: Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt. 摘 要: 冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。
- The Tao of JunkPundits bemoan our trade deficitwith China.But those container ships aren’t heading home empty. 批评家哀叹我们对中国的贸易赤字。但是那些集装箱船并非空着回去。
- In order to lower the flow stress in the cold heading process,the Bauschinger effect of microalloyed steel MFT8 for cold heading bolt was studied. 为了降低冷作强化非调质钢冷镦变形的变形抗力,研究了冷作强化非调质钢MFT8在冷变形过程中的鲍辛格效应。
- Abstract In order to lower the flow stress in the cold heading process, the Bauschinger effect of microalloyed steel MFT8 for cold heading bolt was studied. 摘要 为了降低冷作强化非调质钢冷镦变形的变形抗力,研究了冷作强化非调质钢MFT8在冷变形过程中的鲍辛格效应。
- Locating Pins-Large Head Bolt Fixing Type 定位销-大头螺栓固定型
- counterbore for hexagon socket head bolt 内六角头螺栓埋头孔
- That the cam-bore to valve/tappet dimensions are gauged with the head bolted to the block. 校对(测量)凸轮孔到气阀/凸子的距离时,顶盖已被螺钉固定在机体。
- Remove one socket pin head screw (C), three socket head bolts (D) and gear operator cover (E). 拆卸一个灯头钉头螺丝(C),三个套筒头螺栓(D)和齿轮执行机构盖(E)。
- Oil Free Thrust Washers Low Head Bolt Type 无油垫片短头螺栓型
- Fracture Failure Analysis of Cylinder Head Bolt 缸盖螺栓断裂失效的分析
- Hexagon head bolt and plain washer assemblies GB/T9074.;14-1988六角头螺栓和平垫圈组合件
- half round countersunk head bolt 半圆沉头螺栓