您要查找的是不是:
- surface roughness specimens 表面粗糙度样块
- The microhardness and surface roughness of specimens before and after shot peening was studied and analysed. 分析研究了喷丸强化处理前后的显微硬度和表面粗糙度。
- The surface roughness comparison specimens are used to calibrate the surface roughness of work pieces by comparison. They are widely used in machinery industry. 表面粗糙度比较样块是用比较法检查零件表面粗糙度的一种量具,在机械工业生产中得到广泛的应用。
- The surface roughness comparison specimens are used to calibrate the surface roughness of workpieces by comparison. They are widely used in machinery industry. 表面粗糙度比较样块是用比较法检查零件表面粗糙度的一种量具,在机械工业生产中得到广泛的应用。
- Head dresser is secured high surface rough. 高精粗糙度修整装置。
- Surface roughness of specimen to be gauged will be given by calibrating core\|wings ratio of a set of gauged standard specimen within the same range. 通过标定一组标准样块的核翼比,可以实现该标定范围内待检样块的粗糙度测量。
- The influence of the accelerating voltage and surface rough degree of specimen on measuring precision of en- ergy dispersive X-ray microanalysis(EDS)is discussed. 本文讨论了加速电压和样品表面粗糙度对X射线能谱仪(EDS)分析精度的影响。
- Table 1-2 Surface roughness and chrominance of treated wood. 表2处理材于水质环境下经长期试验后防腐剂之保留率.......57
- Surface roughness has a profound effect on wind speed. 地表粗糙度对风速有相当深刻的影响。
- A New Noncontact Method for Rapidly Measuring Surface Roughness[J]. 引用该论文 胡克平;李田泽.
- Sandblasting to achieve the desired surface roughness. 清洁辊筒表面,边缘倒角。
- The adding of POSS in the polymer lowered the surface roughness. 添加POSS后聚合物表面粗糙度减小。
- Effects of different preparation procedures on abutment surface roughness. 不同预备程序对基牙表面粗糙度的影响。
- Grainy edge Surface roughness on edges of web caused on the drying process. 起皱纸边纸卷边缘在乾燥过程所引致的起皱情况。
- Grainy edge: Surface roughness on edges of web caused on the drying process. 起皱纸边:纸卷边缘在干燥过程所引致的起皱情况。
- Surface roughness of the MSD MCrA1Y coating is far lower than the one of LPPS. MSD的MCrA1Y涂层表面粗糙度远比LPPSMCrA1Y低。
- Problems such as drill life exit burr and machined surface roughness etc. 对采用超声波振动钻削微小孔时钻头的寿命、出口毛刺和加工表面粗糙度等问题进行了研究。
- Methods The ceramic specimens received 6 different surface roughing treatments.Then all discs were observed with SEM. 方法:分别对瓷片进行6种不同的表面粗化处理,喷金后扫描电镜观察瓷表面结构。
- Wood surface roughness was studied by using fractal dimension method. 应用分形维对木材表面粗糙度特征进行研究。
- Thirdly, microstrain-, peripherin-thick, surface roughness, resolution 3%. 不一是球磨砂纲,感平层不薄,暗地粗劣,分辨率3%25。