您要查找的是不是：
- This paper analysed the influence of specimen thickness on test results of surface bonding strength of thin MDF. 分析比较薄型中密度纤维板试件在检测时组合厚度的改变对其表面结合强度测试结果的影响。
- Testing Surface Bonding Strength for Thin MDF 薄型中密度纤维板表面结合强度的测试
- Influence of the Milled Groove Depth on the Testing Results of Surface Bonding Strength of MDF 铣槽深度对中密度纤维板表面结合强度测试结果的影响初探
- surface bonding strength 表面结合强度
- surface bond strength 表面结合强度
- Objective: To study the influence of dry or wet dentin bonding surface on wet bonding strength. 目的:研究牙本质表面的干燥或润湿状态对牙本质湿粘结强度的影响。
- Bond strength is an important parameter for wafer bond. 键合强度是关系到键合好坏的一个重要参数。
- The effects of temperature and retaining time in mild melt treatment on the bonding strength, surface morphology and porosity of tin coating are studied. 摘要研究了软熔处理温度与保温时间对锡镀层的镀层结合力、镀层表面形貌和孔隙率的影响。
- The bonding strength of vapor deposited hard films are measured by this meth... 但人们在膜基结合的测试技术上仍有困难。
- The product is two layers of limpness composite material of polyester thin film coated with bonding agent and single surface bonding of calendaring aromatic polyamide fiber paper. 该产品是由聚酯薄膜涂以胶粘剂，单面粘合轧光聚芳酰胺纤维纸而成的二层柔软复合材料。
- The bond strength experiment of dogtooth exposed to pulsed Nd: YAG laser[J]. 引用该论文 朱建中;黄炜;许肖杰;林斌;陈钰清;顾锡荣.
- Xeno III Adhesive provides bond strength comparable to total etch systems. 异种三胶粘剂粘结强度可比提供总额蚀刻系统。
- The influence of changing the milled groove depth on testing results of the surface bonding strengthof MDF was analysed through experiment. 通过试验分析比较铣槽深度的改变对中密度纤维板表面结合强度测试结果的影响。
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- The modified PVAC emulsion adhesive provides freeze-thaw stability and its bonding strength to low surface energy materials is higher than that of the general PVAG emulsion adhesives. 同时,对聚合温度、搅拌速度、引发剂用量、聚合保温时间等进行了选择。
- Glue Hard brittle brownish solid made by boiling hides and bones.Dissolves in hot water with good bonding strength. 通过煮沸处理动物皮和骨骼而获得的硬而脆的褐色固体。它溶于热水并具有良好的粘合性能。
- The ARB technique not only increased greatly the bonding strength of TA1/Q235 clad plate,but also thinned the microstructure of Q235 plate. 结果表明采用累积叠轧焊方法不仅可以大幅度地提高TA1/Q235的结合强度,而且还可以获得连续均匀、组织细化的Q235的结合组织。
- Glue: Hard brittle brownish solid made by boiling hides and bones.Dissolves in hot water with good bonding strength. 动物胶:通过煮沸处理动物皮和骨骼而获得的硬而脆的褐色固体。它溶于热水并具有良好的粘合性能。
- The phase composition of surface of FeCrAl coating is composed of iron-based solid solution and a little Fe_2O_3.The bond strength of FeCrAl coating produced by HVAS has been studied . FeCrAl涂层的主要相是铁基固溶体和少量Fe_2O_3。
- Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied. 同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨。
