您要查找的是不是:
- Double glow plasma surface alloying technology 双层辉光法
- double-glow plasma surface alloying technology 双辉等离子渗金属
- Preparation of Antibacterial Stainless Layer with Silver by Double Glow Plasma Surface Alloying Technology 双层辉光法制备含银抗菌不锈钢层工艺
- A REVIEW ON THE SURFACE ALLOYING TECHNOLOGIES OF CASTINGS 铸件表面合金化技术研究状况
- Keywords Double glow plasma surface alloying technology;Silver;Antibacterial stainless steel;Antibacterial property;Corrosion resistance;Silvering; 双层辉光法;银;抗菌不锈钢;抗菌性;耐蚀性;渗银;
- the strong decarbonization phenomenon in the double-glow discharge plasma surface alloying technology is the co-result of the surface sputtering effec... 脱碳层深度随阴极电压的增加、加热温度的提高和保温时间的延长而加深;
- surface alloying technology 表面合金化工艺技术
- Prospect of Forming Surface Burn-resistant Titanium Alloys by Double Glow Plasma Surface Alloying Technology 双辉等离子表面合金化技术形成表面阻燃钛合金的展望
- Keywords burn-resistant titanium alloy;double glow plasma alloying technology;surface alloying;copperizing; 阻燃钛合金;双层辉光离子渗金属技术;表面合金化;渗铜;
- The results show that the technology is fit for high melting point metal surface alloying and surface alloying in surface of high melting point metal and some coloured metal. 结果表明,该技术在表面合金化技术领域中,是适合于高熔点金属表面合金化和采用高熔点金属对铁基或某些熔点较高的有色金属表面进行合金化的实用工艺。
- The surface alloying of castings and its application are introduced briefly. 简要介绍了铸件表面合金化的基本情况和应用。
- The surface alloying under casting penetration is synthetically discussed. 对铸渗条件下的铸件表面合金化进行了综合述评;
- Two processes were introduced,that is, the decarbonizing and then surface alloying,and the surface alloying directly. 介绍了两种处理工艺,一种是脱碳后渗金属,另一种是直接渗金属。
- The rapid surface alloying of AISI 316L stainless steel by high current pulsed electron beam(HCPEB) was investigated. 利用强流脉冲电子束对不锈钢表面进行了快速钛合金化。
- The factors to influence the quality of surface alloying and existing problems are analyzed, and the advantages of surface alloying of EPC castings are discussed. 分析了影响合金优质量的各种因素,以及存在的基本问题,并讨论了用消失模法实现表面合金化的优点。
- The compositions and microstructure of surface alloying layer wereinvestigated by the advanced means of XRD,SEM,BES,EDS. 其中渗层的成分分布、显微特征、结构形貌采用了先进的XRD、SEM、BSE,EDS等手段进行了检测分析。
- The principle,discharge mode and alloying process of double glow discharge plasma surface alloying process were introduced particularly. 详细介绍了双层辉光离子渗金属技术的基本原理、放电模式及渗金属过程。
- Some techniques to improve the mechanical properties of V process castings, such as surface alloying, inoculant addition to the coating are presented. 也介绍了改善V法铸件机械性能的方法,如表面合金化,涂料中加入孕育剂等。
- The surface high speed steel and its high propeties are obtained by surface alloying with W Mo, carburizing, quenching and tempering. 采用双层辉光离子渗金属技术,首先在低碳钢表面渗入合金元素钨、钼;
- After quenching and low tempering,it was found that the hardness of surface alloying is up to 1300HV.The hardness value is higher than that of metallurgy HSS. 淬火及回火后表面硬度达到1300HV;超过一般冶金高速钢.