您要查找的是不是:
- N. Shlyannikov, Z.B. Kuang, F.P. Yang (2004), Surface fatigue crack growth behavior, Russian journal Power Engineering Problems. 杨凤鹏,林卓英(2004),表面裂纹疲劳扩展的试验,北京科技大学学报.
- THREE-DIMENSIONAL EFFECT OF SURFACE FATIGUE CRACK PROPAGATION 表面疲劳裂纹扩展的三维效应
- Numerical Simulation to Surface Fatigue Crack Growth 表面裂纹疲劳扩展的数值模拟
- Small Sample Method for Obtaining Surface Fatigue Crack Growth Curve 表面疲劳裂纹扩展性能曲线测试的小样本方法
- Prediction of Surface Fatigue Crack Growth Lives of Structures under Bending Loads at Elevated Temperature 高温受弯构件表面裂纹疲劳扩展寿命预测
- 5. N. Shlyannikov, Z.B. Kuang, F.P. Yang (2004), Surface fatigue crack growth behavior, Russian journal Power Engineering Problems. 杨凤鹏,林卓英(2004),表面裂纹疲劳扩展的试验,北京科技大学学报.
- Propagation behavior of surface fatigue cracks of copper alloy 铜合金表面疲劳裂纹的扩展行为
- length of surface fatigue crack 表面疲劳裂纹长度
- surface fatigue crack 表面疲劳裂纹
- The flaking do increases and undulates the fatigue crack growth rate. 钢中的白点能增加疲劳扩展速率并使扩展速率发生波动。
- The fractography of the fatigue crack initiation displayed cleavage f... 裂纹形成的断裂为穿晶解理机制,预应变可导致更多的二次裂纹。
- Tractices show that eht present computer program is a rathersimple and convenient method which can be used satisfactorily in analysingthe results of surface fatigue crack-growth tests arid in predicting crack propagation life. 实践表明:本文推荐的两套计算程序是处理分析表面裂纹疲劳扩展速率试验数据和估算裂纹扩展寿命的简便而有效的好方法。
- No evidence of fatigue crack extension was detected in the silver Memorial Bridge nor the Fremont Bridge. 在西尔费纪念桥和弗里蒙特桥都没有检查出疲劳裂纹扩展的证据。
- The relationships between microstructure, fracture surface and propagation behaviour of fatigue crack in TiB2 particulate reinforced ZA-8 Zn alloy and in the corresponding constitute matrix materials were studied. 研究了TiB2颗粒增强ZA-8锌合金复合材料和基体材料的疲劳裂纹扩展行为与显微组织、断口的关系。
- The behaviours of fracture, fatigue and fatigue crack propagation in a cast magnesium alloy are systematically studied. 本文系统地研究了铸造镁合金的断裂;疲劳和疲劳裂纹扩展性能.
- The failure forms of cold work roll including contact fatigue crack, spalling, inclusion crack and wear are discussed. 讨论了冷轧工作辊接触疲劳裂纹、剥落、夹杂物裂纹和磨损等失效形式。
- The hardness of camshaft surface quenching layer by laser surface heat treatment has been greatly improved.This is benefit to increase the surface fatigue strength of camshaft. 激光表面热处理后的凸轮轴表面淬硬层硬度有大幅度的增加,有利于提高凸轮轴表面抗疲劳强度。
- The fatigue crack growth rate (FCGR) of 4130X steel in H2S environment is researched in this paper. 研究了4130X钢在硫化氢(H2S)腐蚀介质中的疲劳裂纹扩展速率da/dN。
- In this paper, ALGOL computer program of data reduction techniques, for fatigue crack growth test is described. 本文叙述了疲劳裂纹扩展速率试验数据处理的ALGOL计算程序。
- SEM and Microzone Phase Structure Analysis (MPSA) help to describe the process of fatigue crack growth of the steel. 用SEM和微区相结构测试技术分析了中锰铸钢在疲劳裂纹扩展过程中的行为特点。