您要查找的是不是：
- This paper analysed the influence of specimen thickness on test results of surface bonding strength of thin MDF. 分析比较薄型中密度纤维板试件在检测时组合厚度的改变对其表面结合强度测试结果的影响。
- Testing Surface Bonding Strength for Thin MDF 薄型中密度纤维板表面结合强度的测试
- surface bond strength 表面结合强度
- Bond strength is an important parameter for wafer bond. 键合强度是关系到键合好坏的一个重要参数。
- Influence of the Milled Groove Depth on the Testing Results of Surface Bonding Strength of MDF 铣槽深度对中密度纤维板表面结合强度测试结果的影响初探
- The bond strength experiment of dogtooth exposed to pulsed Nd: YAG laser[J]. 引用该论文 朱建中;黄炜;许肖杰;林斌;陈钰清;顾锡荣.
- Xeno III Adhesive provides bond strength comparable to total etch systems. 异种三胶粘剂粘结强度可比提供总额蚀刻系统。
- The phase composition of surface of FeCrAl coating is composed of iron-based solid solution and a little Fe_2O_3.The bond strength of FeCrAl coating produced by HVAS has been studied . FeCrAl涂层的主要相是铁基固溶体和少量Fe_2O_3。
- Bead inside bore of bearing, the large surface is divided into several small ones, the number of flaws are decreased and the bond strength of spraying layer and substrate is strengthened. 对轴承座内孔进行堆焊 ,将大表面分割成小表面 ,减少了喷涂层收缩时形成的裂纹 ,提高了喷涂层与基体的结合强度。
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- The usual method of strengthening concrete structures with fiber reinforced plastic (FRP) is to bond FRP sheets on the surface of concrete, so the bond strength between concrete and FRP sheets is a key issue which affects strengthening. 纤维增强塑料(简称FRP)加固混凝土结构通常是将其粘贴在混凝土的表面;因此FRP材料与混凝土结构之间的粘结性能成为影响加固效果的关键因素.
- Bead inside bore of bearing, the large surface is divided into several small ones, the number of flaws are decreased and the bond strength of spraying layer and substrate is streng... 对轴承座内孔进行堆焊,将大表面分割成小表面,减少了喷涂层收缩时形成的裂纹,提高了喷涂层与基体的结合强度。这两种方法适合大型轴类零件的表面强化和修复。
- Some existed experimental studies indicated that bond strength of new-to-old concrete interface could increase noticeably by coating old concrete surface with silane coupling agent. 已有试验研究表明,用硅烷偶联剂溶液涂老混凝土表面,可提高新老混凝土的界面粘结强度。
- surface bonding strength 表面结合强度
- Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied. 同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨。
- Bond strength between tooth and base bracket with two bracket base designs: An in vitro comparative study. 两种底板托槽体外粘结强度的对比研究。
- The shear bond strength of titanium and its alloys with SOLIDEX veneering resin. 钛钛合金牙粘结复合树脂。
- The bond strength of Ni-P coating on Mg alloy AZ91D is studied with metalloscope,SEM,EDS. 利用金相显微镜、SEM、能谱仪(EDS),研究了镁合金AZ91D的化学镀Ni-P的结合强度。
- It can be concluded that the bond strength of Tyrian/One-Step Plus has a comparable high value under microtensile test. Tyrian/One-StepPlus黏结系统的黏结性能最好。
- The product is two layers of limpness composite material of polyester thin film coated with bonding agent and single surface bonding of calendaring aromatic polyamide fiber paper. 该产品是由聚酯薄膜涂以胶粘剂，单面粘合轧光聚芳酰胺纤维纸而成的二层柔软复合材料。
