您要查找的是不是：
- A hard supersaturated solid solution of iron characterized by an acicular (needle-like) microstructure. 一种以针尖状微观结构为特征的铁的硬饱和的固溶体。
- After MA for 15 h, nanocrystalline(less than 10 nm) supersaturated solid solution powders of single phase with bcc structure can be obtained. 结果表明:经过15hMA后,可获得单相bcc结构的粒径小于10nm的纳米晶过饱和固溶体粉末;
- The as-plating microstructure of coating is confirmed to be a mixture of amorphous and supersaturated solid solution with XRD analysis. 经XRD分析确认镀态镀层组织为过饱和固溶体与非晶态的混合组织。
- Many nano-metastable phases could be synthesized by high-energy ball-milling, such as nanocrystalline, intermetallic compounds, amorphous and supersaturated solid solution. 利用高能球磨可以合成纳米晶、金属间化合物、非晶相及过饱和固溶相等多种纳米亚稳相。
- XU Ying-fan, CHEN Hong, WANG Wen-kui.Undercooling and formation of supersaturated solid solution of Pd-Ni-P in a 20 m drop tube[J].Acta Physica Sinica, 1992, 41(7): 1111-1118. [4]许应凡; 陈红; 王文魁.;20m落管中Pd-Ni-P合金的过冷与过饱和固溶相的形成[J]
- The brief mechanisms of mechanical alloying are reviewed.The mechanisms of preparing amorphous, nanocrystalline and supersaturated solid solution materials are also reviewed. 阐述了机械合金化的基本原理，金属粉末机械合金化形成非晶、纳米晶和超饱和固溶体的基本机理。
- A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized. 综述了在室温强塑性变形过程中发现的新现象:第二相颗粒的回溶,合金基体重新形成过饱和固溶体。这种过饱和固溶体再时效时,析出相生成顺序不同于淬火固溶体。
- THE SUPERCONDUCTING-NORMAL TRANSITIONS OF FAST QUENCHED SUPERSATURATED SOLID SOLUTION Al-lat% Ge ALLOY 急冷Al-lat%25Ge过饱和固溶体合金的正常-超导转变特性
- second, some particles with the diameter of less than 10 nm precipitate from supersaturated solid solution; 二是机械合金化形成过饱和固溶中在热压时脱溶析出的小于10 nm颗粒；
- Keywords Cu-C-Ti;Cu-CuO-Al;mecbanical alloying;supersaturated solid solution;secondary phase; 机械合金化;过饱和固溶体;第二相;
- supersaturated solid solution 过饱和固溶体
- A solid solution of iron and up to 1 percent of carbon, the chief constituent of hardened carbon tool steels. 马氏本，马登斯体一种由铁和高达百分之一的碳组成的溶液，是硬化碳工具钢的主要成分。
- XRD spectra show that the bulk GaN particles are wurtzite structure, and the NC GaN has small domain size and the structure of solid solution phase. XRD结果显示经由气凝法合成前后氮化镓均为一六方晶系结构，利用块状氮化镓生成的奈米粉体粒径微细且是一种固溶相结构。
- A solid solution of iron and up to1 percent of carbon, the chief constituent of hardened carbon tool steels. 马氏本，马登斯体一种由铁和高达百分之一的碳组成的溶液，是硬化碳工具钢的主要成分
- A nonmagnetic solid solution of ferric carbide or carbon in iron,used in making corrosion-resistant steel. 奥氏体一种非磁性的固状可溶性含铁碳化物或含碳铁，用于制作不锈钢
- A nonmagnetic solid solution of ferric carbide or carbon in iron, used in making corrosion - resistant steel. 奥氏体一种非磁性的固状可溶性含铁碳化物或含碳铁，用于制作不锈钢
- A nonmagnetic solid solution of ferric carbide or carbon in iron,used in making corrosion - resistant steel. 奥氏体一种非磁性的固状可溶性含铁碳化物或含碳铁，用于制作不锈钢
- CIG precursor film is composed of Cu11In9 matrix phase. Ga exists mainly in solid solution by substituting In. CIG前驱膜是以Cu11In9为基础相,Ga原子主要是以替代In原子的固溶体形式存在。
- The solid solution of Sr_(1-x)Ca_xCuO_2 is investigated by means of XRD,EPMA and EDAXmethods. 本文用 XRD、EPMA、EDAX 等方法;研究了 Sr_(1-x)Ca_xCuO_2 固溶体.
- When ?x?>0.6, some TiO?2 enter CeO?2 lattice, and a CeO? 2-TiO?2 solid solution formes. x>0.;6时;一些TiO2已经进入了CeO2晶格;形成了Ce Ti固溶体。
