您要查找的是不是:
- The cavitation undet the superplastic tensile has been observed through the analysis of microstructure. 并通过对组织分析,观察在相应超塑性条件下空洞形成的基本特点。
- Keywords Superplastic tensile forming Strain rate sensitivity exponent Experimental parameter; 超塑性拉伸变形;应变速率敏感性指数;试验参数;
- superplastic tensile 超塑性拉伸
- The heat treatment improves the tensile strength. 热处理能提高抗拉强度。
- This shape allows only tensile strain. 这种形状使膜片只允承受拉伸压力。
- The circumferential normal stress is tensile. 周向正应力是张性的。
- SEM observation shows that the typical cavities are obvious in fracture surfaces of tensile samples after superplastic deformation. 利用扫描电镜观察断口发现典型的超塑性空洞形貌特征。
- Used to measure tensile strength of bundle flax. 用于测定亚麻之打成束纤维的断裂强力。
- They are made up of wire that's high tensile steel. 它们是由高抗拉强度的钢丝组成的。
- Concrete bending tensile strength test machine. 混凝土抗折机。
- Tensile strength middle value is Min. 抗张强度:中间值最小。
- Its tensile strength is above 2000MPa. 以回火状态使用,抗拉强度达2000MPa以上。
- The ESC and tensile properties of PC are studied. 对聚碳酸酯(PC)的耐环境应力开裂性和拉伸性能进行了研究。
- Average filament tensile force and good integrity. 张力均匀,具有良好的成带性。
- H4 composite had a better tensile modulus. 拉伸模数H4组成为最佳。
- The superplastic extrusion of MB26 magnesium alloy is also studied. 另外还对该合金的超塑性挤压作了实验研究。
- To measure tensile strength and breaking elongation of single yarn. 测定单根纱线的抗拉断裂强力断裂伸长。
- The optimal superplastic condition was determined by orthogonal experiment. 由正交试验法确定出最佳超塑性条件;
- We would like to know the tensile stress in the wall. 我们很想知道壁内的拉应力。
- To measure tensile strength and breaking elongation of single yard. 测定单根纱线的抗拉断裂强力和断裂伸长。