您要查找的是不是：
- In using superheated steam, compounding becomes less effective. 使用过热蒸汽时，混合的效果就会减少。
- The gas would now be called "superheated steam". 这时的气体应当叫做“过热蒸汽”。
- In using superheated steam, compoundingbecomes less effective. 使用过热蒸汽时,混合的效果就会减少。
- Heat exchange area is reduced and large size superheated steam boil... 而且该法蒸馏松脂无三废产生,是一种清洁的生产方法。
- New technology of inhibition of coke formation and its application in the ethylene steam cracking are also introduced. 综述了近几年在乙烯裂解过程中结焦机理研究及结焦抑制技术的进展。
- The sources and compositions of steam cracking C9 cut in China and overseas were reviewed. 摘要 系统总结了裂解碳九（C9）来源、组成及其综合利用情况；
- Nomura Giko manufactures superheated steam generation devices powered by electromagnetic induction heating. 通过电磁诱导加热制造生产过热蒸汽发生装置。
- Superheated steam has a very high pressure and temperature, so there is great potential hot. 过热蒸汽有很高的压力和温度，因此有很大的热势能。
- Light alkenes production by hydrocarbon selective oxidation is one of the promising alternative ways to replace conventional steam cracking. 摘要在探索替代传统的烃类蒸汽热裂解制取低碳烯烃工艺的众多研究中，烃类经选择氧化制取低碳烯烃是具有发展前景的方法之一。
- The experimental research on material surface temperature during superheated steam was carried out. 进行了过热蒸汽干燥过程物料温度变化规律的试验研究。
- An application study for superheated steam temperature control system is carried out. 过热汽温控制是电厂锅炉控制系统的一个重要环节。
- In high temperature, the effect of superheated steam temperature on energy consumption isn"t remarkable. 随着风温和循环风速的提高能耗降低，在较高的温度下风温对能耗的影响不显著；
- Studies on the operating parameters with hydrogenation tail oil as feedstock to provide reliable scientific data for commercial steam cracking were conducted on a pilot plant. 为更好地掌握加氢尾油作裂解原料的工艺参数，为装置工业化生产提供可靠的科学依据。
- A simulation of the superheated steam temperature control system has demonstrated the validity of the recomm. 通过对过热汽温控制系统的仿真 ,表明该算法是有效的。
- In the same drying rate, the critical moisture content of material is lower in superheated steam drying than that in heated-air drying. 在相同的干燥速度下，与热风干燥相比过热蒸汽干燥物料临界含水率要低。
- The superheated steam temperature is an important parameter in the waste heat recovery system of sulfur-based sulfuric acid plant. 硫磺制酸装置余热回收系统的过热蒸汽温度是一个重要的参数。
- The jet mill with superheated steam is provided with low-energy consumption and high comminution force than that of the air medium. 对过热蒸汽气流磨和空气气流磨的粉碎性能进行了比较，并以过热蒸汽气流磨作了分级试验，考察了工艺参数对分级性能和效果的景响。
- Study for process optimization of steam cracking of LPG is done in the paper,, it is researched how cracking temperature, water oil ratio and residence time influence the yield of products. 对以液化气(LPG)为原料裂解生产乙烯的工艺进行优化研究,探讨了裂解温度、水油比和停留时间对裂解产物组成的影响,以期找出最佳工艺条件。
- With an earsplitting burst of superheated steam, the contraption lifts Ross gently into the air and, for a few noisy seconds, he is flying. 随着加热的蒸汽发出震耳欲聋的爆鸣声，装置缓缓将罗斯推到空中，闹哄哄的几秒钟后，他就在自由飞行了。
- The technology of separating normal paraffins from the naphtha through the adsorption process was studied to optimize the steam cracking feedstock and utilize the naphtha resource properly. 摘要为了优化乙烯裂解原料并合理利用石脑油资源，将石脑油中的正构烷烃进行分离。
