您要查找的是不是:
- In the first step, billets were made with the method of low super heat casting. 首先采用低过热法制备半固态成形的原始坯料,制定了合理的坯料制备工艺。
- The super heat of electrolysis influences the shape of profile ledge in the cell. . 电解质的过热度影响着电解槽槽膛内形的的形成。
- The results indicate that super heat has few influence on current distribution of cathode and anode as well as average magnetic field. 结果表明:电解质过热度对阴、阳极电流分布、铝液层电位差、铝液平均磁感应强度几乎无影响;
- Ice might melt along the deep cracks, and the meltwater would substantially enhance the heating rate. 冰或许会沿著深入的裂缝开始融化,融化的水又会转而提升加热速率。
- In additional, influence of heating rate and particle diameter on combusting process is studied. 研究了升温速率、粒径对燃烧过程的影响,并计算出废轮胎燃烧动力学参数,获得其燃烧反应机理。
- The temperatures of peak in TG curves and DTG curves all increase with the adding of heating rate. 随着升温速率的提高TG曲线起始温度和DTG曲线峰值温度都逐渐提高。
- Heating rate increases, the yields of NH3 and HCN decrease, while which of HNCO and NO increase. 升温速率提高,NH3及HCN的析出总量减少,但NO及HNCO的析出总量呈增加趋势;
- The effects of solid content and applied voltage on ohmic heating rate of soybean milk were also investigated. 实验证明:豆浆电导率随温度和固形物含量的增高而增大,且电导率与温度为线性关系;
- The dehydration of dihydrate gypsum was affected, besides atmosphere and heating rate. 二水石膏的脱水性能除受气氛的影响外,还受到加热速度的影响,随着加热速度的提高,二水石膏脱水的吸热峰出现的温度点推后。
- The relationship between thickness of MIM green parts and critical heating rate was studied. 研究了注射成形生坯厚度与缺陷产生的临界升温速度的关系。
- Therefore, if a profile for a standard package is used on a micropackage, the component will become super heated. 因此,如果在微型封装上采用标准封装的温度曲线,微型封装器件将过热。
- The endothermic peak of dihydrate gypsum dehydration was delayed with heating rate increasing. 化学石膏颗粒比较细,使得热峰产生的范围较窄,峰形趋于尖而窄。
- Heat pipe is a interesting components which transfer heat from one point to the another.Heat pipe is called super heat conductor because of its extraordinary heat conductibility without heat wastage. 热管是一种能快速将热能从一点传至另一点的装置,由于它具有超常的热传导能力,而且几乎没有热损耗,其导热系数为铜的数千倍,被称作传热超导体。
- The peak temperature of the wood powder with higher MC was smaller with the same heating rate. 在相同升温速率条件下,含水率高的木粉出峰温度低,峰的终止温度低。
- A lined and capped bore hole ten kilometres deep will produce super heated water at three times boiling point, which is the temperature at which electricity is generated. 10公里深的一个排好的密封的钻孔可以产生三倍沸点的滚烫水,此时的温度可以发电。
- Pressure, solvent flowrate and heating rate all have positive effects on extract formation rate(EFR), but work in different ways. 在所考察的范围内,压力、流量和升温速率的增大均可提高萃取物的生成速率。
- In order to study the devolatilization characteristics of pulverized corn stalk at fast heating rate,a laminar furnace was developed. 为了研究闪速加热条件下生物质的热解挥发特性,设计了等离子体加热高温层流炉作为实验设备。
- In order to study the devolatilizati on characteristics of biomass at fla sh heating rate,a laminar furnace was designed and built in our lab. 为研究闪速加热条件下生物质的热解挥发特性,设计了等离子体加热高温层流炉作为实验设备。
- It points out that the relation between optimal heating rate and coefficient of performance of a Carnot heat pump is useless. 指出了卡诺热泵的最佳泵热率与致热系数间的关系是没有实际意义的.
- But in the previous TSC experiments heating rate and some poling parameters are often changed such as polarization temperature, time and field intensity. 然而,传统的TSC法常用改变极化温度、时间、场强以及升温速率等参数来观察TSC谱的变化,并未在测量过程中引入新的作用参数,这使得TSC的应用有一些局限性。