您要查找的是不是：
- The strongest interfacial bond could be achieved the moment that the addition ratio of AWA was 6 %( by weight). HEA-JL型抗裂防水剂的掺量为6%25时，界面结合紧密，界面结合强度高，有利于防水抗渗。
- strong interfacial bond 强界面粘合
- The results showed that the pigments and fillers whose surfaces were amphibious could be dispersed finely,and the interfacial bond was strong in c... 结果表明,用两亲性高分子改性颜填料在乳液中的分散性良好,与聚合物界面粘结强。
- They observed that broken fibers recede within the matrix in composites with weak interfacial bond. 他们观察到弱界面粘结的复合材料，断裂的纤维会在基体中缩回。
- The results showed that the interfacial bond could appreciably enhance when the strength of repair materials increased. 在修补材料中掺入纤维会明显提高界面结合强度,且聚丙烯纤维要优于碳纤维。
- Bending strength, compressive strength, interfacial bond strength and frost-resistance are also studied and analyzed. 并对修补混凝土的抗折、抗压、新老界面粘结强度以及抗冻性等进行了试验研究。
- The interfacial diffusion of alloying element is an important factor to microstructure, apparent hardness and interfacial bond strength. 元素在界面两侧的扩散是影响材料显微组织、表观硬度及界面结合强度的关键。
- The high quality(Cr,Ti,Al)N films were found to display many strengths,including small crystal grain size,fast deposition rate,high micro-hardness(35 GPa),and strong interfacial adhesion(80 N). 结果表明:用此法制备的薄膜为含有多相结构的(Cr,Ti,Al)N多元硬质膜,晶粒细小,沉积速率快,显傲硬度高达35 GPa,结合强度高度达80 N,综合性能优异。
- The log decrement are suitable for determining interface bond damage. 对数衰减率适宜于测定界面粘结的破坏。
- The results show that proper control the motion mode of the particle in plating results in many strengths of the nickel films,such as good uniformity,high compactness,and strong interfacial adhesion. 溅射镀膜时,通过控制空心微珠的运动方式,在空心微珠表面沉积了一层均匀性好、附着力强和致密性好的金属镍膜。
- With this epoxy resin as matrix resin, the matrix has strong interfacial adhesion with the glass fiber, the NOL ring shows good mechanical properties, at the same time, the pressure vess... 树脂浇铸体力学性能优良,与玻璃纤维之间粘结良好,NOL环复合材料力学性能好,产品爆破强度高。
- Business and the case can be transferred to the company strong interface. 可以将业务和案例转让给有实力的界面公司。
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- You need a strong adhesive to bond wood to metal. 需要强力胶才能把木料粘在金属上。
- It indicates that the interfacial bonding of new to old concrete has good shearing property. 结果表明，沟槽式新老混凝土粘结面具有较好的抗剪性能。
- The boat heeled over in a strong wind. 船在强风吹袭下倾侧了。
- The fracture surface of the wires studied by scanning electron microscopy (SEM) shows a suitable interfacial bonding between the fiber and aluminum. 复合丝拉伸断口的扫描电镜(sem)观察可见断面有一定起伏，部分纤维拔出但长度较短，表明纤维与基体具有适当的界面结合。
- The toughening efficiency was related to morphology, interfacial bonding, thermoplastic particle deformation and matrix deformation of the system. 体系增韧效果与相态结构、界面粘合、热塑性粒子的延展性和双马基体的延展性有关。
- Key to their success is the ability to be installed almost anywhere, thanks to strong interfacing capabilities, both to the process and to the control system. 他们的成功关键是被安装几乎无论何处的能力,谢谢到强的接口能力,两者都到过程而且到控制系统。
- Adding Mo can improve the interfacial bonding between the Hadfield steel and TiC, and the best adding ratio between Mo and TiC is 1:3.68. 添加Mo元素能改善TiC与高锰钢界面的润湿性，其中Mo的最佳添加量是Mo与TiC的质量分数比为1：3.;68。
