您要查找的是不是：
- stress rupture testing machine 持久强度试验机
- high temperature creep and rupture testing machine 高温蠕变及持久强度试验机
- Creep stress rupture testing of steel at elevated temperatures 钢在高温下的蠕变应力断裂试验
- Rock rupture caused by decreasing the minimum principal stress was studied with Mogi's general triaxial test machine. 过去曾用常规的三轴试验机研究过减小围压引起的岩石破坏。这种实验的局限性在于中等主应力和最小主应力始终保持相等。
- creep and stress rupture test 蠕变持久试验
- stress rupture test 应力破坏试验
- Chengde Jingmi Precision Testing Machine Co., Ltd. 承德精密试验机有限公司。
- Chengde Precision Testing Machine Co., Ltd. 承德市精密试验机有限公司。
- Concrete bending tensile strength test machine. 混凝土抗折机。
- The development for temperature testing system in the Stress rupture and creep experiments is analyzed. In conclusion, the system of intelligente automatic temperature testing improves the test accuracy and efficiency. 摘要通过对持久、蠕变试验测温发展过程的分析，得出了智能自动测温方法可提高试验员的劳动效率，减轻劳动强度的结论。
- The effects of heat treatment on the microstructures and stress rupture properties for the single crystal Ni-base superalloy have been investigated. 研究了不同热处理工艺对一种镍基单晶高温合金的组织和持久性能的影响。
- American AATCC assigns standard shrinkage test machine. 美国AATCC指定的标准缩水率测试机。
- The interface carbon diffusion,mechanical properties of joints and thermal stress on the interface area have been investigated by means of creep rupture tests,EPMA analysis. 为提高电站锅炉过热器铁素体-奥氏体异种钢焊接接头的高温蠕变断裂强度和延长服役寿命，设计了用专用镍基填充材料焊接的不锈钢-镍基焊缝-耐热钢三元组合接头。
- The effect of melt superheating treatment on the microstructure and stress rupture properties of M963 superalloy under the condition of 1248 K/225 MPa has been investigated. 对M963合金熔体进行了过热处理并在1248 K/225 MPa条件下测试了其持久性能.
- Through the analysis of metallograph of SUS347 austenite steel specimen after rupture testing, the relationship of high temperature damage and rupture strength was studied. 对SUS347奥氏体钢持久强度试验后的试样进行了金相分析,探讨了高温损伤与持久强度之间的关系。
- Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon. 研究了一种含微量(0.;015%25)碳的镍基单晶高温合金在热处理和持久过程中的碳化物演化机制以及各种碳化物对合金持久性能的影响。
- Flow stress of different temperatures and deformation rate on AZ31B magnesium alloy sheets of different preparation method was studied by tensile test machine and metalloscope. 摘要针对不同加工方法制备的AZ31B镁合金薄板，利用热拉伸试验机和金相显微镜对其在不同温度和变形速率下的流变应力进行了实验研究。
- Castability, overload damage and recrystallization are discussed and their effects on stress rupture behavior and high temperature low cycle fatigue fracture are analyzed. 讨论了定向凝固高温合金的过载损伤及其再结晶,较系统地分析了对材料持久性能、高温低循环疲劳断裂的影响。
- Their fracture toughness and hardness were determined with Vicker's indentation test machine. 在维氏硬度仪上测试断裂韧性和硬度。
- The early hydrating characteristics,stress development,the deformation modulus and creep of concrete were investigated using the uniaxial restrained and adjusted temperature-stress testing machine. 约束可调式单轴温度-应力试验机作为一种研究混凝土早期的水化特性、应力发展、变形模量以及徐变等特性的设备。
