您要查找的是不是：
- To each increment of load they respond with a definite change of stress and deformation. 对荷载的每个增量，应力的变形都有确定的变化。
- The results indicate that stress and deformation of the dam in the discharging period is not larger than another. 计算结果分析表明,坝体竣工期、蓄水期的应力应变符合一般规律,泄水期的应力与竣工期、蓄水期相比有所减小,变形相差不是很大。
- Then,the temperature field is loaded in FEA software to predict thermal stress and deformation. 并以此温度场为边界条件,利用FEA软件计算了机体热应力和热变形。
- Then, the stress and deformation of the vacuum chambers are analyzed at room temperature and under bakeout conditions. 对真空室在常温和烘烤状态下的应力和变形进行了分析；
- The stress and deformation of the flume satisfy requirements of the design code. 渡槽结构应力、变形满足规范要求。
- The result showed that the stress and deformation of the being designed welded casing under static state wer... 可进一步对焊接机壳进行动态特性分析,以便为改进设计提供更可靠的理论依据。
- Based on the stress and deformation characteristics of the powders, the mechanism of the strain dela... 文章根据粉末体受力和变形特点提出了粉末体应变推迟、压制蠕变和应力松弛的流变机理。
- Then,the stress and deformation of the vacuum chambers are analyzed at room temperature and under bakeout conditi... 对真空室在常温和烘烤状态下的应力和变形进行了分析;通过系统的实验测试,验证了计算数据。
- Unloading confining pressure tests could be controlled by stress and deformation. 卸荷试验包括应力控制和变形控制两种方法。
- An approach of calculating the initial stress and deformation in tension winding according to misfit is advanced. 基于过盈配合的思想建立了计算张紧力缠绕导致的复合材料飞轮内部预应力和变形的简化模型和方法。
- Then the stress and deformation of the casc in firing test are calculated, and the calcuation results are compared with calculation results of case hydrostatic test. 首先计算了壳体承受内压作用下的应力与变形,并与其水压试验结果进行了比较,然后计算壳体在热试验状态下的应力与变形,也与其水压试验的计算结果进行了比较。
- First contact stress and deformation of parts which have normal shapes and simple contacting status are calculated using Hertz formula and finite element method. 首先,运用了赫兹公式和有限元法对外形规则、接触状态简单的零件进行接触应力和接触变形计算。
- Analyzing the dynamic property,the stress and deformation of the tower frame is the key of the design of aerial ropeway. 对塔架的整体力学性能及应力、变形情况的分析是架空索道结构设计的重点。
- The stress and deformation of orbiting scroll in scroll compressor under the gas loading and thermal loading are analyzed by ANSYS. 采用有限元方法,对涡旋压缩机动涡盘在气体力及温度载荷作用下应力分布特点及变形规律进行了分析。
- By using non-linear FE analytical method, the stress and deformation properties of the Jinzaoqiao Concrete-Faced Rockfill Dam (CFRD) were analyzed. 摘要本文采用非线性有限元分析方法，对福建金造桥水电站面板堆石坝的应力变形特性进行了分析研究。
- Because of non-uniform temperature distribution, at the course of welding and postweld, weldment takes on serious welding stress and deformation. 因为焊接温度场分布十分不均匀，在焊接过程中和焊后将产生相当大的焊接应力和变形。
- FEM analysis using ANSYS software was carried out to study the stress and deformation of the structure of the paper pulp pad under the static load. 在机电产品的纸浆模塑衬垫设计中,利用ANSYS软件进行有限元分析,研究静载作用下的衬垫受力及变形情况。
- The stress and deformation of the reinforced concrete bifurcation with six combined operating conditions in the phases of construction and operating are calculated. 计算了在施工和运行过程中的6种组合工况下钢筋混凝土岔管的应力和变形。
- With two different tensioning schemes, the influence of the tensioning sequence on stress and deformation is calculated and the tensioning sequence is optimized. 基于2种不同张拉顺序的方案;计算出2种张拉顺序对构件应力和变形的影响;并对张拉顺序进行了优化.
- The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions. 分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析；
