您要查找的是不是：
- Discussion On Welding of Stainless Clad Plate 不锈钢复合钢板焊接探讨
- Interfacial Structure and Performance of Stainless Clad Plate 不锈钢复合板的界面组织结构与性能
- stainless clad plate 镀防锈层板
- When explosive welding the big and thick stainless steel clad plate, there are some quality defects of small area melding in interface appeared random. 摘要爆炸焊接中厚不锈钢复合板时，板面容易随机产生小面积的界面熔化缺陷。
- The practice proved that the welding quality of stainless steel clad plate was very steady if following the welding points. 实践证明,只要遵循其焊接要点,不锈钢复合钢板的焊接质量是非常稳定的。
- The paper analyzed the welding characteristic of stainless steel clad plate, and summarized three factors that were welding groove, welding materials and parameter, welding sequence. 对不锈钢复合钢板的焊接特点进行了理论分析,总结出其焊接三要素:焊接坡口、焊接材料和参数、焊接顺序。
- The stainless steel single-ear step-less clamps: Adopt a high-quality stainless clad steel creation, is a time of product with tight . 用途：单耳无级卡箍：采用优质不锈钢制作，是一次性卡紧产品。其边缘圆滑不损伤所夹紧的软管。
- It has been developed many years using FEM methods to simulate rolling process.But the three-dimentional simulation of stainless clad strip is still infrequence. 轧制过程的有限元模拟已开展多年,但在三维有限元模拟下对变形区域内的应力-应变分布的研究很少,尤其是双金属复合板热轧复合过程的有限元模拟尚未见报道。
- WELDING PROCEDURE OF STAINLESS STEEL CLAD PLATE 不锈钢复合钢板的焊接工艺
- thick-wall stainless steel clad plate 厚壁不锈钢复合板
- The ARB technique not only increased greatly the bonding strength of TA1/Q235 clad plate,but also thinned the microstructure of Q235 plate. 结果表明采用累积叠轧焊方法不仅可以大幅度地提高TA1/Q235的结合强度,而且还可以获得连续均匀、组织细化的Q235的结合组织。
- Clad plate,which is made of titanium/steel, is tore in the edge of the plate during the process of explosives welding. 钛/钢复合板在爆炸焊接工艺中四周边角被撕裂现象严重,是爆炸焊接钛/钢复合板的难点之一。
- Welding material selction of clad plate refers to those of the same clad material respectively. 复层焊接材料挑选参考异类复层材料焊接时选用的焊接材料。
- WELDING PROCESS FOR AUSTENITE STAINLESS CLAD STEEL PLATE 奥氏体系复合钢板的焊接工艺
- Welding of Stainless Clad Steel Vessel 不锈复合钢容器的焊接
- Welding of stainless clad sheet steel 不锈复合钢板的焊接
- WELDING CRACK ANALYSIS OF STAINLESS STEEL CLAD PLATE 不锈钢复合钢板焊接裂纹
- Hot pressing formation to the head of stainless steel clad plate 不锈钢复合钢板封头热压成型
- big and thick stainless steel/carbon steel clad plate 中厚不锈钢／钢复合板
- One of main reason for producing SCC in cladding plate weldments is the role of tensile residual stresses. 复板焊接结构出现应力腐蚀开裂的主要原因之一是拉伸残余应力的作用。
