您要查找的是不是：
- The sealing design criteria to measure the factors of spiral wound gasket were adopted, based on this bolt loads of flange can be determined by using the new PVRC method. 采用密封设计准则,通过试验确定了金属缠绕式垫片的垫片系数,在此基础上,按照PVRC新方法对法兰螺栓载荷进行了计算。
- A optimization test method was adopted in the study of compression-recovery performance on graphite spiral wound gasket .The optimum parameters were obtained. 采用优化试验方法,对柔性石墨缠绕垫片的压缩-回弹性能进行研究,从中获得了最佳参数。
- Combining with flange joints fact and the ASME B16.20 to spiral wound gasket request, such as PN 6.3 MPa pipe flange in HG standard, the seating stress of spiral wound gasket was analyzed. 结合法兰连接的实际;按照ASMEB16.;20对缠绕式垫片压缩的要求;以HG标准中PN6
- OR Spiral wound gasket with outer ring 金属缠绕垫片带外环
- IOR Spiral wound gasket with inner and outer ring 金属缠绕垫片带内外环
- IR Spiral wound gasket with inner ring 金属缠绕垫片带内环
- Bottom cover spiral wound gasket 底部盖螺旋盘绕密封垫
- Spiral wound gasket filled with PTFE 聚四氟乙烯金属缠绕垫片
- metal graphite spiral wound gasket 金属石墨缠绕垫片
- Temporary flexitalic gaskets instead of 316L spiral wound gaskets were used in aneffort to reduce hydrotest overhead costs. 二、原因/益处 使用临时的福莱西垫圈替代316L螺旋垫圈，是为了达到减少静水力测试的运行费用的目的。
- Root Cause/Benefit Temporary flexitalic gaskets instead of 316L spiral wound gaskets were used in aneffort to reduce hydrotest overhead costs. 二、原因/益处 使用临时的福莱西垫圈替代316L螺旋垫圈，是为了达到减少静水力测试的运行费用的目的。
- Structural design of a new shape spiral wound gasket 新型缠绕垫片的结构设计
- The design of gasketed joints is critical for low-emission applications. For better control and elimination of unwinding of spiral wound gaskets, a fully-enclosed gasket cavity is desirable. 对于低污染排放应用来说,垫圈连接设计是关键性的。为了更好的控制和防止螺旋式垫圈的退绕作用,需要配置完全包装的垫圈腔。
- It is proved through test of nation akl technical standards that the spiral wound gaskets made by the plant can meet or exceed the technical requirements of the national and foreign standards. 生产出的缠绕垫片经过各项国家技术标准测试，其外观质量和内在质量均达到或超过国内外标准技术要示。
- An Experiment Investigates on Spiral wound Gasket for Lower-Pressure Flange 低压管法兰用缠绕式垫片的试验研究
- Compression Performance Analysis of Shaped-Metal Strip of Spiral Wound Gasket 缠绕垫片成型钢带压缩性能分析
- An experiment investigation on spiral wound gasket for low-pressure flange 低压管法兰用缠绕式垫片试验研究
- STRONGER, LEAKPROOF BODY-BONNET JOINT FULLY ENCASED SPIRAL WOUND GASKET 与内部缠绕垫片完全连接的、更坚固、防泄漏的阀帽
- Problems discussion of spiral wound gasket in its designing, making and using 缠绕垫片设计、制造和使用中存在的问题
- An Analysis and Experiment Investigation on Pre-Stress of Spiral Wound Gasket 金属缠绕式垫片的预紧应力分析及试验研究
