您要查找的是不是：
- spiral gear teeth 螺旋齿轮齿
- spiral gear tooth 螺旋齿轮齿
- To cause(gear teeth) to become engaged. 使（齿轮）相啮合
- Spray or paint grease onto the gear teeth. 将油酯喷或涂到齿轮齿条上。
- Exact modeling of gear teeth is based on meshing theory. 摘要根据齿轮啮合原理，建立了轮齿的精确齿形。
- Check ring gear and pinion gear teeth contact pattern. 检查环形齿轮齿接触印痕。
- A high speed line material vertical rolling mill framework moderating machine gearbox of Hunan steel Co., Ltd, the gear teeth of the first transmission spiral bevel wheel were broken. 湘钢一高速线材粗中轧立式机架减速机齿轮箱,第一级传动螺旋伞齿轮轮齿断裂。
- The gear tooth flank form is a very important factor to dynamic performance of spiral bevel gears. 螺旋锥齿轮的实际齿面形状是影响其动力学性能的一个非常重要的因素。
- SE series spiral gear used for automotive air-conditioning compressor is successfully developed. 成功研制开发了SE系列汽车空调压缩机螺旋齿轮。
- Gear teeth in mesh. 相互啮合的齿轮
- The processing precision and surface quality of diehead spiral gear are improved,resulting in an improvement in the qual... 该工艺铣削出的模头螺旋齿的尺寸精度和表面质量有了大幅度提高,进而提高了铝电解碳阳极的质量,提高了工效,降低了生产成本。
- The engagement of gear teeth. 啮合齿轮的互相咬合
- The distance between two corresponding points on adjacent screw threads or gear teeth. 螺距两个相对应的点或相邻的螺钉之间的距离
- If possible ,use the same lubricant for the raceway system and the gear teeth as used for initial operation. 如可能，使用与第一次润滑相同的润滑剂来润滑轴承座圈和齿轮齿条。
- The test of Pb samples indicates that the die set works smoothly and gear teeth are filled fully. 根据铅试样模拟实验表明,模具装置工作顺畅,齿轮成形饱满。
- It should be said GALLUS machine meshing gear teeth, there was a small staves of opportunities. 不该说GALLUS的机械是歪齿轮啮合的，呈现齿杠的时机小。
- The gear teeth and meshing line are distorted in the meshing process as a result of wearing and rise in temperature. 实际应用中，由于磨损和受热等原因，使得齿轮齿廓以及啮合过程中啮合线都发生了畸变。
- Milling can produce flat or angled surfaces, groves, slots, gear teeth, and other profiles, depending on the shape of the cutters being used. 铣削可根据所用的铣刀形状分别加工平面或斜面、槽口、缝、齿轮齿及其它型面。
- Longer life and lower noise could be acquired by CBN wheel grinding on HRH gear teeth for removing the distortion in the heat treatment. 在HRH齿轮齿上进行的CBN研麿消除了热处理过程中的变形，使齿轮具有较长的使用寿命和较低的噪音性能。
- MANUFACTURE METHOD OF HONING WHEEL FOR SPIRAL GEAR 螺旋锥齿轮珩磨轮的制造方法
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
